SETUP SONY A7R IV
Connect the USB-C cable (camera control cable) to the Camera with Pixy-SM via the CTRL port.
Plug the Hotshoe plate (camera control cable) into the camera.
Insert the gimbal memory card into the slot under the bar of the tilt axis.
Insert the camera memory card into the slot of the camera.
Set the camera mode to M – Manual mode.
Set the exposure compensation to "0“.
Click the camera menu button. Then select the Network and enable the PC remote function.
Click the camera menu button. Goto Network -> PC Remote Function -> PC Remote Cnct Method and choose USB
Go to File Format to choose the image format
Note: Currently, the Pixy SM only supports JPEG. The Raw format will be supported in a future update
Tips: GPS log file only creat when doing the mapping mission, flight attitude above 50 meters.
Note: Check the status light and message on the DJI pilot app in case of errors.
Last updated