FOLLOW MODE SETTINGS

The most widely used mode of single operation is Follow mode where the gimbal operator controls to pan and tilt of the camera. The camera movement will mimic the user’s input from the top-mount while the footage remains stable. The follow mode can be configured to be either very linear and robotic, or smooth and cinematic.

Follow mode settings are available for Tilt axis and Pan axis.

SPEED	Defines how fast camera will follow the movement.
SMOOTH	Smooth out the camera movement by adjusting this parameter. The higher the value is the smoother camera moves but at the expense of more delay in following the movements.
WINDOW	When the movement is out of the window zone, the camera starts to move. Within the window zone, the camera maintains its direction.
TILT LOCK	When the movement is out of the window zone, the camera starts to move. Within the window zone, the camera maintains its direction.
ROTATION LIMIT	If this option is selected, the tilt axis will maintain its angle and only be controlled by remote control.
UP LIMIT	Travel of Tilt and Roll axis can be limited using UP LIMIT and DOWN LIMIT.
DOWN LIMIT	Set the up limit for Tilt or Roll axis (in 1 degree unit). The default values are -90 for Tilt and -45 for Roll.
WINDOW	Set the down limit for Tilt or Roll axis (in 1 degree unit). The default values are 90 for Tilt and 45 for Roll.