AERIAL MODE

GREMSY H16

Q 1: Can the H16 work with CanLink?.

• Yes, it can.

Q 2: Is it possible to use a third-party battery to power the H16 in aerial?

• It is possible, however we highly recommend using the original H16 batteries to avoid any unexpected disruptions.

Q 3: Is the Gremsy landing gear suitable for H16?

• Absolutely.

Q 4: Can I use CanLink with H16 under ALTA?

Yes, you can. Some of our clients made some custom models in order to assemble Circular Quick Release with second flight controller like A2, A3, Naza, Wookong and use CanLink in ALTA setup.

For further information about using Canlink and H16 with ALTA, feel free to contact us at [email protected]

Q 5: How can I mount Gremsy H16 under ALTA systems?

Please refer to one of the options below:

• Using ALTA Adapter in order to connect H16 pan motor to the Toad in the Hole. In this situation, CanLink as additional option is not suitable. Here is guide image for your reference.

• Removing the Toad in the Hole of ALTA and replacing by Circular Quick Release so that all function of H16 is maintained in connection with Canlink.

Q 6: Can I mount the H16 under M600? Is it possible to use with standard landing gear of M600 or I need to use with extended gear?

• Yes, Gremsy H16 is absolutely suitable for original M600 without extended landing gear. For mounting, we highly recommend the Damping Plate Pro to assemble with 12mm carbon rail of frame.

Q 7: Can I mount the H16 under S1000/ S1000+?

• Yes, you can. We highly recommend you to use Damping Plate Pro to assemble the H16 into frame and please make sure the total weight of the system does not exceed the maximum payload of S1000/ S1000+.

Q 8: Which dimension of H16 in aerial mode?

Please refer at below images:

Q 9: How much weight Gremsy H16 in Aerial mode?

In aerial mode, the H16 weighs 2.2 kgs (4.85 lbs) excluding batteries.