DAMPING ASSEMBLY GUIDE
PIXY SM
Components required:
- DJI - Standard damping on M300 RTK
- Gremsy - Damping extension for Pixy SM
What’s in the box of the damping extension?
| F Adapter bundle x2 | |
|---|---|
B Adapter bundle x2 |
|
ASSEMBLY INSTRUCTIONS
STEP 1: Separate the standard damping from the M300 RTK.
STEP 2: Note the marked position of the standard damping as below.
STEP 3: Remove silicone balls from the standard damping.
STEP 4: Assemble the “F adapter bundles” into the “position 1 & 2” as marked in step 2.
STEP 5: Assemble the “B adapter bundles” into the “positions 3 & 4” as marked in step 2.
STEP 6: Complete the damping for Pixy SM.
STEP 7: Mount the damping on M300 RTK and ready for use with Pixy SM.
Last updated
