I/O Connection
Pixy MR
GIMBAL CONNECTION
HDMI:
To output video from the camera.
Connector type: micro HDMI.

CTRL:
CTRL is a serial protocol (UART) port which is used to interface with Sony ILX-LR1 via USB-C port.
Connector type: JST SM10B-GHS-TB(LF) (SN).

USB-C:
To interface with computer or upgrade firmware.
Connector type: USC type C.
Device Switch:
To switch between the gimbal and SOM for firmware upgrading.
Connector type: 2 level switch.
Micro SD card:
To insert the micro SD card for Geo data storage.
Connector type: Micro SD card.
Note: Recommend SD Card from 30GB, at least 50MB/s read/write speed

GIMBAL BUTTONS
Boot:
To push the firmware during upgrading process.

Reset:
To reset the system if needed.

Last updated