I/O Connection
Pixy SM
GIMBAL CONNECTION
HDMI:
To output video from the camera.
Connector type: micro HDMI.
CTRL:
CTRL is a serial protocol (UART) port which is used to interface with Sony A7R IV via USB C port.
Connector type: JST SM10B-GHS-TB(LF) (SN).
USB-C:
To interface with computer or upgrade firmware.
Connector type: USC type C.
Device Switch:
To switch between the gimbal and SOM for firmware upgrading.
Connector type: 2 level switch.
Micro SD card:
To insert the micro SD card for Geo data storage.
Connector type: Micro SD card.
Note: Recommend SD Card from 30GB, at least 50MB/s read/write speed
GIMBAL BUTTONS
Boot:
To push the firmware during upgrading process.
Reset:
To reset the system in case needed.
QUICK RELEASE CONNECTION
CONNECT
STEP 1: The marks on the top part and bottom part must be aligned.
STEP 2: Keep everything aligned and attach the bottom part to the top part.
STEP 3: Rotate the bottom counter-clockwise until the mark on the ring aligned with the locked icon.
DISCONNECTION
STEP 1: Press & hold the release button.
STEP 2: Rotate the bottom clockwise.
STEP 3: When the mark on the top aligned with the unlock icon on the bottom, the PIXY SM can be detached from the top part of the Quick Release.
Last updated