BATTERY & CHARGER
GREMSY H7
Q 1: How to charge the H3 batteries?
Please learn more at Page 04 of the H3 Manual.
Q 2: How long does it take to fully charge the battery of Gremsy H3?
It takes about 1 - 2 hours to fully charge the battery.
Q 3: How long should the H3 batteries last?
Each battery can run up to 6 - 8 hours depending on the attached camera rig and gimbal usage.
Q 4: How many batteries do the H3 include in the box?
There is one battery in each H3 package.
Q 5: What are general good practices while using the Gremsy Li-ion batteries?
The following are some good practices for you:
Store the battery in cool places at room temperature (ideally between 10°C - 26°C).
Gremsy batteries do not have built-in over-discharge protection. They are recommended to use battery voltage checker to make sure the batteries staying above 3V per cell (it’s 4.2V per cell for full charged battery). Otherwise, battery’s cell will be dipped too low and your battery will be un-rechargeable. - Stop using or charging the battery immediately if the battery appears to be damaged. - Remove the battery from the gimbal in case you don’t use it for a long time.
Charging current: select 2A for 3400mAh battery and 3A (or 4A) for 6800mAh battery.
Charging procedure: You should plug in the balance cable first, and then connect with the JST cable.
Q 6: How do I add the battery into the H3?
Please click Here to refer to Gremsy H3 Install Battery tutorials.
Q 7: How much weight of Gremsy H3 battery3
The gPower 3S-3400mAh battery weighs only 143.5 kgs
Q 8: Which battery does the H7 use?
The H3 uses the gPower 3S-3400mAh battery which helps to power the gimbal up to 6 - 8 hours depending on your desired setup.
Last updated