Introduction
Last updated
Last updated
This new gimbal is purpose-built for Sony ILX-LR1 camera, featuring integration with the MAVLink protocol and incorporating the AirPixel Entire R3 module inside for comprehensive camera control, allowing full control via MavCam.
This gimbal has been redesigned with S-Port, which known as Gremsy Mio Quick Release. Standardizing a Quick Release standard across multiple products enables the hot swap functionality of payloads or gimbals, thereby enhancing the optimization of drone systems for diverse photogrammetry missions such as mapping, inspection, surveying,... and efficiency during these missions.
1
S-port
2
Pan Motor
3
Pan Balance Adjustment
4
Pan Thumb Screw
5
Roll Motor
6
Roll Balance Adjustment
7
Roll Thumb Screw
8
Gimbal Status Led
9
Tilt Motor
10
Tilt Front-Back Balance Adjustment
11
Tilt Up-Down Balance Adjustment
12
Tilt Up-Down Thumb Screw
13
Tripod Screw
14
Tilt Front-Back Thumb Screw
15
Camera Power Cable
16
Camera Connection Hub
Airpixel Entire R3 Built-In.
S-PORT: Hot swap gimbal/payload feature
Inherits optimized design elements from Pixy LR.
Video stream via HDMI.
Setting the camera via Mavcam.
Control the gimbal via Ardupilot/Px4.
Geotagging via Entire R3.
