Trouble Shooting

Pixy LR Roll Drift Trouble Shooting

Go to Gtune -> Settings -> IMU -> Accel

  1. Switch "Advance" to the left to enable and enter the password above

  2. Adjust the X offset (Roll) and watch on the actual level of the roll. Using the level meter to check. Instead of adjusting the X offset, you can place the gimbal on the level plate. Then click calibrate. The bottom of Tilt camera cage is touching the plate. Refer to: Accel Calibration.mp4

  3. Go to IMU - Gyro, then click calibrate for 2 - 3 times.

  4. Reboot and check the level again.

Last updated