PIXY QUICK RELEASE

Pixy Quick Release (QR) of Swift enables quick and easy assembly with various platforms through high-speed connector pins. With onboard HDMI and AUX ports, signals from cameras go on live for direct monitoring and evaluation.

This product is compatible with

PIXY U PIXY F PIXY WE

QUICK RELEASE CONNECT

QUICK RELEASE DISCONNECT

I/O CONNECTION

Pixy Quick Release Connectors & Pinouts

POWER

12V input. Connect the stable 12V output from the provided UBEC to this connector. The UBEC allows 14V-52V input range and output 12V/5A

Connector type: JST SM02B-SFKH-TF

COM1/CAN

COM1 is a serial protocol (UART) port which is used to interface with a computer via USB. CAN is to interface with DJI Flight controller.

Connector type: JST SM06B-GHS-TB(LF)(SN)

COM2/COM3

COM2/COM3 is serial protocol (UART) port, this port is internally connected to COM2/COM3 port on the gimbal controller. COM2 is to interface with Pixhawk via Mavlink protocol or other modules that use serial protocol (UART). COM3 is reserved for future use.

Connector type: JST SM06B-GHS-TB(LF)(SN)

SBUS/PPM

To interface with SBUS/PPM receiver. This port is internally connected to SBUS/PPM port on the gimbal controller.

Connector type: 3 pin, 2.54mm pitch

JR

to interface with JR/SPEKTRUM satellite receiver.

Connector type: JST S3B-ZR

AUX

Provide 12V output (1A max) to power camera and accessories and optional signals S1, S2, S3, S4, S5, S6 (0.25A max) for users to connect to other devices such as AV signal or camera trigger, ....This port is internally connected to AUX port on the tilt axis.

Do not apply power to AUX port at pin 7 and 8, doing so may damage the electronics of the gimbal.

Connector type: JST GHR-08V-S