I/O CONNECTIONS
Two-axis T3V3
Signal USB-C 2.0 goes straight from Quick Release to Tilt gimbal
Upgrade firmware gimbal
RC: Signal remote control gimbal
Pin 1 is the leftmost
Pin | Name |
|---|---|
1 | +5V |
2 | SBUS signal remote |
3 | GND |
4 | Spektrum signal remote |
5 | +3V3 |
6 | CAN_L |
7 | CAN_H |
COM2/4: signal UART of the gimbal, using the same T3V3
Pin 1 is the leftmost
Pin | Name |
|---|---|
1 | +5V |
2 | Tx2 |
3 | Rx2 |
4 | Tx4 |
5 | Rx4 |
6 | GND |
AUX: Aux port with S1-S4 optional signals for users to connect to other devices such as AV signal or camera trigger for additional functionality. The signal goes straight from QR to the tilt gimbal
Pin 1 is the leftmost
Pin | Name |
|---|---|
1 | S1 |
2 | S2 |
3 | S3 |
4 | S4 |
5 | GND |
Last modified 4mo ago