DOWNLOAD

FIRMWARE

Gremsy Firmware Latest Version

Release gremsyPixyLR-2Axis_v783_Official · Gremsy/PixyLR-2Axis-FirmwareGitHub

What's new?

NOTE: Gyro MUST be completely calibrated after upgrading.

Open gTune --> SETTINGS --> GYRO --> CALIBRATE

NOTE: Motor MUST be calibrated in Roll-Tilt mode.

NOTE: Users should load the recommended gimbal parameters and perform an AUTO-TUNE process. Open gTune --> SETTINGS --> STIFFNESS --> AUTOTUNE

NOTE: Please use the latest gTune Desktop version at

GTUNE DESKTOP

https://github.com/Gremsy/gTuneDesktop...ses/latestgithub.com

NOTE: Please use the latest gSDK version at

G-SDK

GitHub - Gremsy/gSDK: SDK application used by software to control the Gremsy’s gimbalGitHub

What's new?

• Re-add Follow Window (in Pan-Tilt mode)

• Compatible with QGC 4.4, Ardupilot 4.3 or higher

Open gTune --> SETTINGS --> CONTROLS --> MAVLINK

Improvements

• Improve gimbal control logic with MAVLink.

Fix bugs