IR Camera
Scale
Adjust how the IR image is displayed on screen:
Original – Maintains the sensor’s native aspect ratio
Full Screen – Scales the image to fill the display
Overlay ROI (Region of Interest)
Enable or disable visual overlays for measurement regions:
Enable – Displays measurement boxes on the IR image
Disable – Hides all ROI overlays
ROI Measurement
Select the size of the temperature measurement region:
Small
Medium
Large
Full Screen
📌 Choose a smaller ROI for precise spot measurements or larger regions for broader thermal averaging.
FFC Mode (Flat-Field Correction)
Control how thermal noise and image uniformity are corrected:
Auto – Automatic calibration based on internal logic
Manual – User-triggered calibration
External – Triggered by external signal
External with Auto Table Switch – Uses external trigger and auto compensation table selection
FFC Period (Minutes)
This setting determines how frequently the camera performs an automatic FFC operation.
Unit: Minutes
Typical Range: 1 to 60 minutes (or based on manufacturer limits)
Default: Often 5
Saving Your Settings
Click “APPLY” to confirm and apply your IR camera configuration. Settings will be used immediately or after the next FFC trigger.
Last updated
Was this helpful?