Installing & Balancing
Last updated
Last updated
Use 4 x M3x6 screw to secure the camera to the camera tilt cage
Camera Control and Power Cable (bright blue)
Connect to the CTRL port on Pixy MR
Connect to Power DC 10-18V IN port on ILX-LR1
Connect to USB-C port on ILX-LR1
HDMI cable (blue)
Connect to micro HDMI port on Pixy MR
Connect to micro HDMI port on ILX-LR1
Note: Recommend using with the micro HDMI cable comming with the Pixy MR package or the flexible & high quality HDMI cable.
When the proper front-back balance is achieved, the camera will stay level when you remove your hands.
Rotate the camera to 90 degree down, then adjust the Tilt Vertical Balance adjustment.
When the proper left-right balance is achieved, the camera will remain level when you remove your hand.
When the proper left-right roll balance is achieved, the camera will stay level when you remove your hands.
Tilt the gimbal about 20 degrees from the verticality, identify if the gimbal is front heavy or back heavy. Slide the pan axis slider until the camera does not swing.