HDMI HYPER QUICK RELEASE V2.0
HDMI HYPER QUICK RELEASE V2.0 distinguishes itself from the prior version by featuring a USB-C 2.0 signal port connecting directly from Quick Release to the tilt gimbal, along with an Aux port offering optional signals (S1-S4) for user connections to devices like AV signals or camera triggers for expanded functionality. The signal path runs directly from QR to the tilt gimbal, with Pin 1 positioned as the leftmost pin.
This product is compatible with
Pixy SGREMSY TWO-AXIS T3V3I/O CONNECTION
1. Power Input
| PIN | 1 | 2 |
|---|---|---|
Signal | GND | VCC |
2. USB-C Port
Signal USB-C 2.0 goes straight from Quick Release to Tilt gimbal
| PIN | Signal | Type | PIN | Signal | Type |
|---|---|---|---|---|---|
A1 | GND | B12 | GND | ||
A2 | B11 | ||||
A3 | B10 | ||||
A4 | VBUS | 5V input | B9 | VBUS | 5V input |
A5 | CC1 | Serial Resistor 5K1 Ohms with GND | B8 | SBU2 | NOT connect |
A6 | DP | D+ usb | B7 | DN | D- usb |
A7 | DN | D- usb | B6 | DP | D+ usb |
A8 | SBU1 | NOT connect | B5 | CC2 | Serial Resistor 5K1 Ohms with GND |
A9 | VBUS | 5V input | B4 | VBUS | 5V input |
A10 | B3 | ||||
A11 | B2 | ||||
A12 | GND | B1 | GND |
3. Micro USB Port
Upgrade firmware gimbal
| PIN | Name | |
|---|---|---|
1 | VCC | Not connect |
2 | D- | |
3 | D+ | |
4 | ID | Not connect |
5 | GND |
4. RC Port
RC: Signal remote control gimbal Pin 1 is the leftmost
| PIN | Function | Type |
|---|---|---|
1 | 5V | Output |
2 | SBUS/PPM | Signal control |
3 | GND | |
4 | Spek | Signal control |
5 | GND | |
6 | CAN_L | Signal control |
7 | CAN_H | Signal control |
5. HDMI output
6. COM2/4 Port
COM2/4: signal UART of the gimbal, using the same T3V3 Pin 1 is the leftmost
| Pin | Name |
|---|---|
1 | +5V |
2 | Tx2 |
3 | Rx2 |
4 | Tx4 |
5 | Rx4 |
6 | GND |
7. AUX Port
AUX: Aux port with S1-S4 optional signals for users to connect to other devices such as AV signal or camera trigger for additional functionality. The signal goes straight from QR to the tilt gimbal. Pin 1 is the leftmost.
| PIN | Name |
|---|---|
1 | S9 |
2 | S8 |
3 | S7 |
4 | S6 |
5 | GND |
MOUNTING QUICK RELEASE
Using 32mm square M3 pattern to mount the top part onto the damping frame.
Connect
STEP 1: The marks on the top part and bottom part must be aligned. The button on the ring should be aligned with the unlocked icon as shown in the first picture.
STEP 2: Keep everything aligned and attach the bottom part to the top part.
STEP 3: Rotate the ring clockwise until hearing a snap, the button should be automatically popped out and aligned with a locked icon.
Disconnect
STEP 1: Press and hold the button.
STEP 2: Rotate the ring counterclockwise.
STEP 3: When the button aligns the unlock icon, the Pixy S can be detached from the top part of Hyper HDMI Quick Release 2.0.
Last updated
