Setup Radiometric Environment Factors

1. Overview

• This section will be setup the environment factors for the radiometric camera of the Vio payload

• To do this section, user must have knowlegde about the radiometric camera. The user can check the datasheet for the radiometric camera of the Vio payload to get more information.

2. Setup the radiometric environment factors

Atmospheric Temperature (K)

• Range: 100 to 500 Kelvin Set the ambient air temperature for thermal compensation.

---

Distance (m)

• Range: 0 to 255 meters Enter the distance between the Orus-L and the target object to enhance thermal accuracy.

---

Emissivity Target (%)

• Range: 0% to 100% Defines the emissivity of the target surface.

⚠️ Default for most organic materials is around 95%.

---

Humidity (%)

• Range: 0% to 100% Input the relative humidity of the environment, which may affect thermal readings.

---

ModifyB / ModifyK

• Range: 0 to 255 (each) Advanced calibration parameters used for fine-tuning thermal correction models.

Only modify if you have specific calibration requirements or guidance.

---

Window Reflect Temperature (K)

• Range: 100 to 500 Kelvin Temperature of the window or lens surface through which the sensor observes the target.

---

Temperature Unit

Choose your preferred unit for displaying temperature:

• Celsius (°C)

• Fahrenheit (°F)

• Kelvin (K)

---

Saving Your Settings

Click “APPLY” to save and activate the new environmental configuration. Settings will be used to refine thermal imaging calculations in real time.