HDMI HYPER QUICK RELEASE V2.0

HDMI HYPER QUICK RELEASE V2.0 distinguishes itself from the prior version by featuring a USB-C 2.0 signal port connecting directly from Quick Release to the tilt gimbal, along with an Aux port offering optional signals (S1-S4) for user connections to devices like AV signals or camera triggers for expanded functionality. The signal path runs directly from QR to the tilt gimbal, with Pin 1 positioned as the leftmost pin.

This product is compatible with

Pixy SGREMSY TWO-AXIS T3V3

I/O CONNECTION

1. Power Input

Connector Type: 43650-0214

PIN	1	2
Signal	GND	VCC

2. USB-C Port

Signal USB-C 2.0 goes straight from Quick Release to Tilt gimbal

Connector Type: USB4085-GF-A

PIN	Signal	Type	PIN	Signal	Type
A1	GND		B12	GND
A2			B11
A3			B10
A4	VBUS	5V input	B9	VBUS	5V input
A5	CC1	Serial Resistor 5K1 Ohms with GND	B8	SBU2	NOT connect
A6	DP	D+ usb	B7	DN	D- usb
A7	DN	D- usb	B6	DP	D+ usb
A8	SBU1	NOT connect	B5	CC2	Serial Resistor 5K1 Ohms with GND
A9	VBUS	5V input	B4	VBUS	5V input
A10			B3
A11			B2
A12	GND		B1	GND

3. Micro USB Port

Upgrade firmware gimbal

Connector Type: 10118194-0001LF

PIN	Name
1	VCC	Not connect
2	D-
3	D+
4	ID	Not connect
5	GND

4. RC Port

RC: Signal remote control gimbal Pin 1 is the leftmost

Connector Type: SM07B-GHS-TB(LF)(SN)

PIN	Function	Type
1	5V	Output
2	SBUS/PPM	Signal control
3	GND
4	Spek	Signal control
5	GND
6	CAN_L	Signal control
7	CAN_H	Signal control

5. HDMI output

Connector Type: 0467651301

6. COM2/4 Port

COM2/4: signal UART of the gimbal, using the same T3V3 Pin 1 is the leftmost

Connector Type: SM06B-GHS-TB(LF)(SN)

Pin	Name
1	+5V
2	Tx2
3	Rx2
4	Tx4
5	Rx4
6	GND

7. AUX Port

AUX: Aux port with S1-S4 optional signals for users to connect to other devices, such as AV signal or camera trigger for additional functionality. The signal goes straight from QR to the tilt gimbal. Pin 1 is the leftmost.

Connector Type: SM05B-GHS-TB(LF)(SN)

PIN	Name
1	S9
2	S8
3	S7
4	S6
5	GND

MOUNTING QUICK RELEASE

Using 32mm square M3 pattern to mount the top part onto the damping frame.

Connect

STEP 1: The marks on the top part and bottom part must be aligned. The button on the ring should be aligned with the unlocked icon as shown in the first picture.

STEP 2: Keep everything aligned and attach the bottom part to the top part.

STEP 3: Rotate the ring clockwise until hearing a snap, the button should be automatically popped out and aligned with a locked icon.

Disconnect

STEP 1: Press and hold the button.

STEP 2: Rotate the ring counterclockwise.

STEP 3: When the button aligns the unlock icon, the Pixy S can be detached from the top part of Hyper HDMI Quick Release 2.0.