# Gimbal Balance
## 1. FRONT-BACK TILT AXIS BALANCE
* Loosen the Tilt Front-Back Thumb Screw, then gently adjust the camera backward/forward until it doesn't swing and stays in any given position when released.
* Tighten the Tilt Front-Back Thumbs screw.
## 2. UP-DOWN TILT AXIS BALANCE
* Loosen the thumbscrew of Tilt vertical adjustment, then rotate the camera to 90° and slide front or back.
* When the proper vertical balance is achieved, the camera will stay level when you remove your hands.
* Tighten the Tilt thumbscrew after balancing.
## 3. ROLL AXIS BALANCE
* Loosen the thumbscrew Roll adjustment, then slide right or left.
* When the proper Roll balance is achieved, the camera will stay at the horizontal level.
* Tighten the Roll thumbscrew after balancing.
## 4. PAN AXIS BALANCE
* Tilt the Gimbal about 20° from the verticality, identify if the gimbal is front heavy or back heavy. Slide the pan axis slider until the camera does not swing.
* Loosen the thumbscrew, then gently slide the pan axis slider backward/forward until it doesn't swing and stay at any given position when released.
* Tighten the thumbscrew to make sure pan axis slider is locked in position.
.jpg?alt=media&token=072168ec-4555-4f06-b467-53849ae4496b)
.jpg?alt=media&token=a1790dda-6287-4a25-81e5-b132bd940682)
.jpg?alt=media&token=269873aa-6cb3-4f5f-9532-b7ff7ec8952a)
.jpg?alt=media&token=95a4f8d0-df2a-4380-beac-6645a1883f8b)