Mounting Manual

1. Mounting the gPort to M300

*Note: If you use Pixy WS gimbal, please purchase the damping extension and follow this Guide to custom the DJI standard damping before mounting gPort to M300.

STEP 1: Remove the cover of the gPort STEP 2: Align the white and insert the gPort

STEP 3: Rotate the gPort lock to the locked position STEP 4: Check the locked position

2. Mounting the gPort and Gimbal Camera

STEP 1: The marks on the top part and bottom part must be aligned. The mark on the ring should be aligned with the unlocked icon as shown in the first picture. STEP 2: Keep everything aligned and attach the bottom part to the top part.

STEP 3: Rotate the ring clockwise until the mark on the ring aligned with the locked icon.