OPERATION MODES

MIO HAS 2 OPERATION MODES

LOCK MODE

Lock Mode is a stabilization mode where the camera maintains orientation independently of the rest of the gimbal and the orientation can be changed by an external control signal from remote control.

FOLLOW MODE

Follow Mode: in this mode, the camera will mimic the operator’s movement and allows one person to control camera tilt and pan without using an external device like a remote control.

MIO SUPPORTS

SINGLE OPERATOR: using FOLLOW mode.

DUAL OPERATOR: a second operator can use a Remote Controller (SBUS, PPM) to control gimbal’s movement.

WORKING OPERATION

MIO has 3 working operations: Normal, Inverted, Front Mount

After powering up the gimbal , it will automatically detect if the gimbal is in inverted operation or normal operation based on pan motor position.

During working, switching to other working operation made easy by changing pan motor position, the gimbal will automatically detect new type of working operation.

SWITHING BETWEEN MODES

Using mode channel on remote control

POSITIONS	MODES
Hight	Follow Mode Motors ON
Middle	Lock Mode Motors ON
Low	Motors OFF

Using software

If there is a remote control signal, changing modes or turning motors on/ off by other methods such as using the function button or software will not take effect because the remote control signal has the highest priority and override the command.