# Camera Mounting

### 1. Put the camera on the gimbal camera cage.

<figure><img src="/files/sIHKwjjAV55RSYsbQGZN" alt="" width="563"><figcaption></figcaption></figure>

### 2. Pass the side camera-locked screws through the hole of the gimbal and tighten the screw.

Torque: 0.63Nm

<figure><img src="/files/FrT6rbzb73BB58PaD3SJ" alt="" width="563"><figcaption></figcaption></figure>

### 3. Tighten the Tripod Screw

Torque: 1.75Nm

<figure><img src="/files/NBQe1GgaseYbeIGSyaKs" alt="" width="563"><figcaption></figcaption></figure>

### 4. Connecting cables between the camera and gimbal

• Connect the Camera Power cable to the Camera.

• Connect the Camera Connection Hub to the Camera.

• Make sure the cables are properly connected

• Make sure the hub presses the power cable as picture.

<figure><img src="/files/UwJ2A9mCsvqbTppkwHEi" alt="" width="563"><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.gremsy.com/gimbals/pixy-lr-two-axis/getting-started/camera-mounting.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.