# Gimbal Balance ### 1. FRONT-BACK TILT AXIS BALANCE • Loosen the Tilt Front-Back Thumb Screw, then gently adjust the camera backward/forward until it doesn’t swing and stay at any given position when released. • Tighten the Tilt Front-Back Thumb screw.

### 2. UP-DOWN TILT AXIS BALANCE • Loosen the thumbscrew of Tilt Vertical Adjustment, then rotate the camera to 90 degrees and slide front or back. • When the proper vertical balance is achieved, the camera will stay level when you remove your hands. • Tighten the Tilt thumbscrew after balancing.

### 3. ROLL/PAN AXIS BALANCE There will be Roll or Pan axis balancing according to the operation mode. 1. **Roll-Tilt Operation Mode/Front Mount** #### Roll Balace • Loosen the thumbscrew of Roll Adjustment, then slide right or left. • When the proper Roll balance is achieved, the camera will stay at horizontal level. • Tighten the Roll thumbscrew after balancing.

2. **Pan-Tilt Operation Mode/Belly Mount** #### Pan Balance * Tilt the gimbal mounting plate/drone frame about 20 degrees * Loosen the thumbscrew of Pan Adjustment, then slide right or left. * When the proper Pan balance is achieved, the camera will stay at any direction ( drone tilt an angle) * Tighten the Pan thumbscrew after balancing.