Dual operation setup with Herelink remote.
Zio
To use the "Dual operation" mode, two Herelink remotes need to be connected to the same network. Specifically:
The main remote will broadcast Wi-Fi
The Slave remote will connect to the main's Wi-Fi
1. Install the Main remote
The main remote is a remote directly connected to Air Unit
a. Setup Wi-Fi hotspot
b. Enable Dual Operation mode
Turn on “Dual Cont” and “Main”
Choose “Save” and restart the remote
c. Enable Video Sharing
2. Install the Slave remote
The Slave remote is a remote that will connect to the system via the Wi-Fi of the Main remote
a. Connect to the Wi-Fi of the main remote
b. Install Dual Operation mode
Turn on “Dual Cont” and choose IP target is the IP of the Main remote (default: 192.168.43.1)
Choose “Save” and restart the remote
c. Install Dual Operation mode
Turn off all options in AutoConnection
Create the UDP connection to the main remote
The menu for controlling the payload after a successful connection.
Setup receive video sharing
3. Setup the controlling payload channel
After setting both main and slave remote in "Dual Cont" mode, the joystick channels of the slave remote will display the value on the main remote.
User can choose joystick to control payload
Set corresponding channel: CH6 for pan, CH8 for tilt (or change axis in single mode)
Channels must be set corresponding to items 4.2.2 and 4.1.2
Successful connection
Last updated
