Getting started

The Zio can be used with the drones using Mavlink standard

Supported Micro SD Cards

The Zio comes with a 64GB Micro SD card and this is the maximum capacity the Zio supports. We recommend using a UHS-1 Micro SD card to minimize the delay when reading and writing high-resolution video data.

Installing the Zio

  1. 1.
    Remove the Gimbal cap.
  2. 2.
    Align the white dot on the gimbal connector and the white dot on the drone, then insert the gimbal.
  3. 3.
    Rotate the gimbal lock to the locked position with the white dots aligned.
  4. 4.
    Attach the Micro SD card. A Default Micro SD card is recommended.