Quick Release


Using 32mm square M3 pattern to mount the top part onto the damping frame.


STEP 1: The marks on the top part and bottom part must be aligned. The button on the ring should be aligned with the unlocked icon as shown in the first picture.

STEP 2: Keep everything aligned and attach the bottom part to the top part.

STEP 3: Rotate the ring clockwise until hearing a snap, the button should be automatically popped out and aligned with a locked icon.


STEP 1: Press and hold the button.

STEP 2: Rotate the ring counterclockwise.

STEP 3: When the button aligns the unlock icon, the Pixy S can be detached from the top part of Hyper HDMI Quick Release 2.0.

Last updated