# GREMSY DOCUMENTATION

## GREMSY PRODUCT SUPPORT

- [GREMSY DOCUMENTATION](https://docs.gremsy.com/gremsy-documentation.md)
- [GENERAL](https://docs.gremsy.com/payloads/general.md)
- [GREMSY PAYLOAD CONTROL TYPE](https://docs.gremsy.com/payloads/general/gremsy-payload-control-type.md)
- [CONTROL MODE](https://docs.gremsy.com/payloads/general/gremsy-payload-control-type/control-mode.md)
- [SETTING REMOTE CONTROL MODE](https://docs.gremsy.com/payloads/general/gremsy-payload-control-type/setting-remote-control-mode.md)
- [UPGRADE FIRMWARE & SOFTWARE](https://docs.gremsy.com/payloads/general/upgrade-firmware-and-software.md): The information about UPGRADE FIRMWARE for ZIO PAYLOADS and VIO PAYLOADS.
- [UPGRADE GIMBAL FIRMWARE](https://docs.gremsy.com/payloads/general/upgrade-firmware-and-software/upgrade-gimbal-firmware.md): The information about UPGRADE FIRMWARE for ZIO PAYLOADS and VIO PAYLOADS.
- [UPGRADE PAYLOAD SOFTWARE](https://docs.gremsy.com/payloads/general/upgrade-firmware-and-software/upgrade-payload-software.md): The information about UPGRADE SOFTWARE for Gremsy Payload
- [ZIO PAYLOAD](https://docs.gremsy.com/payloads/general/upgrade-firmware-and-software/upgrade-payload-software/zio-payload.md)
- [VIO PAYLOAD](https://docs.gremsy.com/payloads/general/upgrade-firmware-and-software/upgrade-payload-software/vio-payload.md)
- [Using OTA update](https://docs.gremsy.com/payloads/general/upgrade-firmware-and-software/upgrade-payload-software/vio-payload/using-ota-update.md): Process OTA Update Software for Zio Payloads and Vio Payloads.
- [Using GremsyFlashTools](https://docs.gremsy.com/payloads/general/upgrade-firmware-and-software/upgrade-payload-software/vio-payload/using-gremsyflashtools.md): Zio Payloads and Vio Payloads.
- [GREMSY PAYLOAD SDK](https://docs.gremsy.com/payloads/general/gremsy-payload-sdk.md): Designed for developers and integrators, the Gremsy Payload SDK provides the tools you need to customize and control your Gremsy Payload and Gimbal system for unique applications.
- [Mavlink Command List](https://docs.gremsy.com/payloads/general/gremsy-payload-sdk/mavlink-command-list.md)
- [PRODUCT MAINTENANCE](https://docs.gremsy.com/payloads/general/product-maintenance.md)
- [Quick Release Installation & Maintenance Guide](https://docs.gremsy.com/payloads/general/product-maintenance/quick-release-installation-and-maintenance-guide.md)
- [STORAGE CONDITIONS](https://docs.gremsy.com/payloads/general/product-maintenance/storage-conditions.md)
- [TROUBLESHOOTING](https://docs.gremsy.com/payloads/general/troubleshooting.md)
- [Gremsy – Flight Controller Connection Verification Guide](https://docs.gremsy.com/payloads/general/troubleshooting/gremsy-flight-controller-connection-verification-guide.md)
- [ORUS-L](https://docs.gremsy.com/payloads/orus-l.md)
- [FAQ](https://docs.gremsy.com/payloads/orus-l/faq.md)
- [GENERAL](https://docs.gremsy.com/payloads/orus-l/general.md)
- [HARDWARE CONFIGURATION](https://docs.gremsy.com/payloads/orus-l/hardware-configuration.md)
- [MOUNTING](https://docs.gremsy.com/payloads/orus-l/hardware-configuration/mounting.md)
- [I/O CONNECTION](https://docs.gremsy.com/payloads/orus-l/hardware-configuration/i-o-connection.md): Specifications are subject to change. Product currently in release phase.
- [SOFTWARE CONFIGURATION](https://docs.gremsy.com/payloads/orus-l/software-configuration.md)
- [WEB SETTING APP](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app.md)
- [SYSTEM](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/system.md)
- [IP ADDRESS](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/system/ip-address.md)
- [STORAGE](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/system/storage.md)
- [GENERAL SETTING](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/system/general-setting.md)
- [VIDEO STREAMING](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/system/video-streaming.md)
- [PiP Configuration](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/system/pip-configuration.md)
- [LOCALIZATION](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/system/localization.md)
- [MAVLINK](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/mavlink.md)
- [GIMBAL](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/gimbal.md)
- [IR CAMERA](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/ir-camera.md)
- [Environmental Factors](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/ir-camera/environmental-factors.md)
- [Isotherms Regions](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/ir-camera/isotherms-regions.md)
- [IR Camera Settings](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/ir-camera/ir-camera-settings.md)
- [MEDIA FILES](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/media-files.md)
- [REMOTE CHANELS](https://docs.gremsy.com/payloads/orus-l/software-configuration/web-setting-app/remote-chanels.md)
- [ASSISTANCE SOFTWARE](https://docs.gremsy.com/payloads/orus-l/software-configuration/assistance-software.md)
- [gTune Desktop](https://docs.gremsy.com/payloads/orus-l/software-configuration/assistance-software/gtune-desktop.md)
- [Payload Plus App](https://docs.gremsy.com/payloads/orus-l/software-configuration/assistance-software/payload-plus-app.md)
- [Payload Assistant Desktop](https://docs.gremsy.com/payloads/orus-l/software-configuration/assistance-software/payload-assistant-desktop.md)
- [THIRD PARTIES INTEGRATION](https://docs.gremsy.com/payloads/orus-l/third-parties-integration.md)
- [MAVLINK AUTOPILOT](https://docs.gremsy.com/payloads/orus-l/third-parties-integration/mavlink-autopilot.md)
- [SETUP WITH ARDUPILOT](https://docs.gremsy.com/payloads/orus-l/third-parties-integration/mavlink-autopilot/setup-with-ardupilot.md)
- [SETUP WITH PX4](https://docs.gremsy.com/payloads/orus-l/third-parties-integration/mavlink-autopilot/setup-with-px4.md)
- [SETUP WITH SKYNODE](https://docs.gremsy.com/payloads/orus-l/third-parties-integration/mavlink-autopilot/setup-with-skynode.md)
- [PAYLOAD SETTING](https://docs.gremsy.com/payloads/orus-l/third-parties-integration/mavlink-autopilot/payload-setting.md)
- [Payload Definition File Download](https://docs.gremsy.com/payloads/orus-l/third-parties-integration/mavlink-autopilot/payload-setting/payload-definition-file-download.md)
- [Payload Settings Menu](https://docs.gremsy.com/payloads/orus-l/third-parties-integration/mavlink-autopilot/payload-setting/payload-settings-menu.md)
- [COMPANION COMPUTER FOR UAV & ROBOTICS PLATFORM](https://docs.gremsy.com/payloads/orus-l/third-parties-integration/companion-computer-for-uav-and-robotics-platform.md)
- [UPGRADE](https://docs.gremsy.com/payloads/orus-l/upgrade.md)
- [FIRMWARE VERSION](https://docs.gremsy.com/payloads/orus-l/upgrade/firmware-version.md)
- [SOFTWARE VERSION](https://docs.gremsy.com/payloads/orus-l/upgrade/software-version.md)
- [ZIO](https://docs.gremsy.com/payloads/zio.md)
- [PAGE DIAGRAM](https://docs.gremsy.com/payloads/zio/page-diagram.md): General diagram of the ZIO Support page, and the steps you must go through to set it up properly. Please consult before going into details
- [FAQ](https://docs.gremsy.com/payloads/zio/faq.md): Zio Payloads
- [GENERAL](https://docs.gremsy.com/payloads/zio/general.md): Zio Payloads
- [HARDWARE CONFIGURATION](https://docs.gremsy.com/payloads/zio/hardware-configuration.md): Detail guides for setting up with Payload hardware.
- [I/O Connection](https://docs.gremsy.com/payloads/zio/hardware-configuration/i-o-connection.md): Zio will be used with the S-PORT, which will help users plug and unplug the camera in or out of the drone as fast as possible.
- [Micro SD Cards](https://docs.gremsy.com/payloads/zio/hardware-configuration/micro-sd-cards.md)
- [STATIC IP SETTINGS](https://docs.gremsy.com/payloads/zio/hardware-configuration/static-ip-settings.md)
- [LED STATUS INDICATOR](https://docs.gremsy.com/payloads/zio/hardware-configuration/led-status-indicator.md)
- [SOFTWARE CONFIGURATION](https://docs.gremsy.com/payloads/zio/software-configuration.md)
- [ZIO SETTING APP](https://docs.gremsy.com/payloads/zio/software-configuration/zio-setting-app.md)
- [Setup IP Address](https://docs.gremsy.com/payloads/zio/software-configuration/zio-setting-app/setup-ip-address.md)
- [Setup Remote Channels](https://docs.gremsy.com/payloads/zio/software-configuration/zio-setting-app/setup-remote-channels.md)
- [Control by Remote Controller](https://docs.gremsy.com/payloads/zio/software-configuration/control-by-remote-controller.md): Control by Remote Controller for SBUS or PPM
- [Remote Control Modes](https://docs.gremsy.com/payloads/zio/software-configuration/control-by-remote-controller/remote-control-modes.md)
- [Test Remote Channels by Remote RC Sbus](https://docs.gremsy.com/payloads/zio/software-configuration/control-by-remote-controller/test-remote-channels-by-remote-rc-sbus.md): ZIO PAYLOADS
- [Control Signals Diagram](https://docs.gremsy.com/payloads/zio/software-configuration/control-by-remote-controller/control-signals-diagram.md)
- [AUTOPILOT SETUP](https://docs.gremsy.com/payloads/zio/autopilot-setup.md): Detail guides for setting up with Autopilot systems
- [SETUP WITH PX4](https://docs.gremsy.com/payloads/zio/autopilot-setup/setup-with-px4.md)
- [1. Hardware Setup](https://docs.gremsy.com/payloads/zio/autopilot-setup/setup-with-px4/1.-hardware-setup.md)
- [2. Setting on the remote control](https://docs.gremsy.com/payloads/zio/autopilot-setup/setup-with-px4/2.-setting-on-the-remote-control.md)
- [3. Setting parameters](https://docs.gremsy.com/payloads/zio/autopilot-setup/setup-with-px4/3.-setting-parameters.md)
- [4. Setting App QGroundControl](https://docs.gremsy.com/payloads/zio/autopilot-setup/setup-with-px4/4.-setting-app-qgroundcontrol.md)
- [SETUP WITH ARDUPILOT](https://docs.gremsy.com/payloads/zio/autopilot-setup/setup-with-ardupilot.md): This page will show you step by step to configure ZIO payload with Ardupilot system.
- [1. Hardware Setup](https://docs.gremsy.com/payloads/zio/autopilot-setup/setup-with-ardupilot/1.-hardware-setup.md)
- [2. Setting on the remote control](https://docs.gremsy.com/payloads/zio/autopilot-setup/setup-with-ardupilot/2.-setting-on-the-remote-control.md)
- [3. Parameter Settings](https://docs.gremsy.com/payloads/zio/autopilot-setup/setup-with-ardupilot/3.-parameter-settings.md)
- [4. Setting App QGroundControl](https://docs.gremsy.com/payloads/zio/autopilot-setup/setup-with-ardupilot/4.-setting-app-qgroundcontrol.md)
- [SETUP WITH SKYNODE](https://docs.gremsy.com/payloads/zio/autopilot-setup/setup-with-skynode.md)
- [GREMSY PAYLOADSDK](https://docs.gremsy.com/payloads/zio/gremsy-payloadsdk.md)
- [HARDWARE SETUP](https://docs.gremsy.com/payloads/zio/gremsy-payloadsdk/hardware-setup.md)
- [PAYLOAD SDK EXAMPLE](https://docs.gremsy.com/payloads/zio/gremsy-payloadsdk/payload-sdk-example.md)
- [SETTINGS ON THE REMOTE CONTROL](https://docs.gremsy.com/payloads/zio/settings-on-the-remote-control.md): Zio
- [SETUP DUAL REMOTE CONTROLLER](https://docs.gremsy.com/payloads/zio/settings-on-the-remote-control/setup-dual-remote-controller.md)
- [CAMERA SETTING MENU](https://docs.gremsy.com/payloads/zio/camera-setting-menu.md): Zio Camera Settings and Guideline
- [Camera Definition File Download](https://docs.gremsy.com/payloads/zio/camera-setting-menu/camera-definition-file-download.md)
- [Camera Settings Menu](https://docs.gremsy.com/payloads/zio/camera-setting-menu/camera-settings-menu.md)
- [GIMBAL SETTINGS](https://docs.gremsy.com/payloads/zio/gimbal-settings.md)
- [Qground Control](https://docs.gremsy.com/payloads/zio/gimbal-settings/qground-control.md)
- [ETHERNET VIDEO STREAM](https://docs.gremsy.com/payloads/zio/ethernet-video-stream.md)
- [HARDWARE SETUP](https://docs.gremsy.com/payloads/zio/ethernet-video-stream/hardware-setup.md): Simple Diagram to show how to connect the ZIO Payload via the Ethernet
- [ZIO PAYLOAD CONFIGURATION](https://docs.gremsy.com/payloads/zio/ethernet-video-stream/zio-payload-configuration.md): Configure the ZIO IP to stream and control over Ethernet
- [ETHERNET RECEIVER CONFIGURATION](https://docs.gremsy.com/payloads/zio/ethernet-video-stream/ethernet-receiver-configuration.md)
- [Change RTSP streaming parameters](https://docs.gremsy.com/payloads/zio/ethernet-video-stream/change-rtsp-streaming-parameters.md)
- [ETHERNET TELEMETRY PAYLOAD CONTROL](https://docs.gremsy.com/payloads/zio/ethernet-telemetry-payload-control.md)
- [Setup with Herelink](https://docs.gremsy.com/payloads/zio/ethernet-telemetry-payload-control/setup-with-herelink.md): This is an example to setup the Zio works with ethernet telemetry on Herelink system v1.1
- [DOWNLOAD](https://docs.gremsy.com/payloads/zio/download.md): ZIO PAYLOADS
- [VIO](https://docs.gremsy.com/payloads/vio.md): GREMSY UNVEILS VERSATILE, LIGHTWEIGHT EO/IR PAYLOAD FOR VARIOUS DRONE PLATFORMS
- [PAGE DIAGRAM](https://docs.gremsy.com/payloads/vio/page-diagram.md): General diagram of the VIO Support page, and the steps you must go through to set it up properly. Please consult before going into details
- [FAQ](https://docs.gremsy.com/payloads/vio/faq.md): Vio
- [GENERAL](https://docs.gremsy.com/payloads/vio/general.md)
- [HARDWARE CONFIGURATION](https://docs.gremsy.com/payloads/vio/hardware-configuration.md): Detail guides for setting up with Payload hardware
- [Mounting](https://docs.gremsy.com/payloads/vio/hardware-configuration/mounting.md)
- [I/O Connection](https://docs.gremsy.com/payloads/vio/hardware-configuration/i-o-connection.md): Vio will be used with the S-PORT, which will help users plug and unplug the camera in or out of the drone as fast as possible.
- [Micro SD Cards](https://docs.gremsy.com/payloads/vio/hardware-configuration/micro-sd-cards.md)
- [LED STATUS INDICATOR](https://docs.gremsy.com/payloads/vio/hardware-configuration/led-status-indicator.md)
- [COMPUTER'S IP CONFIGURATION](https://docs.gremsy.com/payloads/vio/hardware-configuration/computers-ip-configuration.md)
- [SOFTWARE CONFIGURATION](https://docs.gremsy.com/payloads/vio/software-configuration.md)
- [VIO SETTINGS APP](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app.md): Updated on May 2025
- [SYSTEMS](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/systems.md)
- [Operation Mode](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/systems/operation-mode.md)
- [Setup IP Address](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/systems/setup-ip-address.md)
- [Media Format](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/systems/media-format.md)
- [General Setting](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/systems/general-setting.md)
- [Video Streaming](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/systems/video-streaming.md)
- [PiP Configuration](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/systems/pip-configuration.md)
- [Localization](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/systems/localization.md)
- [Ethernet/RTSP Video Stream Parameter Configuration](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/systems/ethernet-rtsp-video-stream-parameter-configuration.md)
- [MAVLINK](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/mavlink.md)
- [GIMBAL](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/gimbal.md)
- [IR CAMERA](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/ir-camera.md)
- [VIO G1](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/ir-camera/vio-g1.md)
- [Setup Radiometric Environment Factors](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/ir-camera/vio-g1/setup-radiometric-environment-factors.md)
- [Isotherms Regions](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/ir-camera/vio-g1/isotherms-regions.md)
- [VIO F1](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/ir-camera/vio-f1.md)
- [Environmental Factors](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/ir-camera/vio-f1/environmental-factors.md)
- [Isotherms Regions](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/ir-camera/vio-f1/isotherms-regions.md)
- [IR Camera](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/ir-camera/ir-camera.md)
- [MEDIA FILES](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/media-files.md): Manage Media Files for Zio Payloads and Vio Payloads.
- [REMOTE CHANNELS](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/remote-channels.md)
- [CUSTOM MODELS](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/custom-models.md)
- [OTA UPDATE](https://docs.gremsy.com/payloads/vio/software-configuration/vio-settings-app/ota-update.md)
- [Payload Assistant App](https://docs.gremsy.com/payloads/vio/software-configuration/payload-assistant-app.md): For Zio Payloads and Vio Payloads
- [Install and Configs](https://docs.gremsy.com/payloads/vio/software-configuration/payload-assistant-app/install-and-configs.md)
- [Control Gimbal Features](https://docs.gremsy.com/payloads/vio/software-configuration/payload-assistant-app/control-gimbal-features.md)
- [Control Camera Features](https://docs.gremsy.com/payloads/vio/software-configuration/payload-assistant-app/control-camera-features.md)
- [Tracking Assistant Features](https://docs.gremsy.com/payloads/vio/software-configuration/payload-assistant-app/tracking-assistant-features.md)
- [TroubleShooting](https://docs.gremsy.com/payloads/vio/software-configuration/payload-assistant-app/troubleshooting.md)
- [AUTOPILOT SETUP](https://docs.gremsy.com/payloads/vio/autopilot-setup.md): Detail guides for setting up with Autopilot systems
- [SETUP WITH PX4](https://docs.gremsy.com/payloads/vio/autopilot-setup/setup-with-px4.md)
- [1. Hardware Setup](https://docs.gremsy.com/payloads/vio/autopilot-setup/setup-with-px4/1.-hardware-setup.md)
- [2. Setting on the remote control](https://docs.gremsy.com/payloads/vio/autopilot-setup/setup-with-px4/2.-setting-on-the-remote-control.md)
- [3. Setting parameters](https://docs.gremsy.com/payloads/vio/autopilot-setup/setup-with-px4/3.-setting-parameters.md)
- [4. Setting App QGroundControl](https://docs.gremsy.com/payloads/vio/autopilot-setup/setup-with-px4/4.-setting-app-qgroundcontrol.md)
- [SETUP WITH ARDUPILOT](https://docs.gremsy.com/payloads/vio/autopilot-setup/setup-with-ardupilot.md): This page will show you step by step to configure ZIO payload with Ardupilot system.
- [1. Hardware Setup](https://docs.gremsy.com/payloads/vio/autopilot-setup/setup-with-ardupilot/1.-hardware-setup.md)
- [2. Setting on the remote control](https://docs.gremsy.com/payloads/vio/autopilot-setup/setup-with-ardupilot/2.-setting-on-the-remote-control.md)
- [3. Parameter Settings](https://docs.gremsy.com/payloads/vio/autopilot-setup/setup-with-ardupilot/3.-parameter-settings.md)
- [4. Setting App QGroundControl](https://docs.gremsy.com/payloads/vio/autopilot-setup/setup-with-ardupilot/4.-setting-app-qgroundcontrol.md)
- [SETUP WITH SKYNODE](https://docs.gremsy.com/payloads/vio/autopilot-setup/setup-with-skynode.md)
- [GREMSY PAYLOADSDK](https://docs.gremsy.com/payloads/vio/gremsy-payloadsdk.md)
- [HARDWARE SETUP](https://docs.gremsy.com/payloads/vio/gremsy-payloadsdk/hardware-setup.md)
- [PAYLOAD SDK EXAMPLE](https://docs.gremsy.com/payloads/vio/gremsy-payloadsdk/payload-sdk-example.md)
- [CAMERA COMMAND LIST](https://docs.gremsy.com/payloads/vio/gremsy-payloadsdk/camera-command-list.md)
- [Supported KLV Keys MISB 0601 Full](https://docs.gremsy.com/payloads/vio/gremsy-payloadsdk/supported-klv-keys-misb-0601-full.md)
- [SETTINGS ON THE REMOTE CONTROL](https://docs.gremsy.com/payloads/vio/settings-on-the-remote-control.md)
- [SETUP DUAL REMOTE CONTROLLER](https://docs.gremsy.com/payloads/vio/settings-on-the-remote-control/setup-dual-remote-controller.md)
- [CAMERA SETTING MENU](https://docs.gremsy.com/payloads/vio/camera-setting-menu.md): Vio Camera Settings and Guideline
- [Camera Definition File Download](https://docs.gremsy.com/payloads/vio/camera-setting-menu/camera-definition-file-download.md)
- [Camera Settings Menu](https://docs.gremsy.com/payloads/vio/camera-setting-menu/camera-settings-menu.md)
- [GIMBAL SETTINGS](https://docs.gremsy.com/payloads/vio/gimbal-settings.md)
- [Gtune](https://docs.gremsy.com/payloads/vio/gimbal-settings/gtune.md)
- [ETHERNET VIDEO STREAM](https://docs.gremsy.com/payloads/vio/ethernet-video-stream.md)
- [HARDWARE SETUP](https://docs.gremsy.com/payloads/vio/ethernet-video-stream/hardware-setup.md): Simple Diagram to show how to connect the VIO Payload via the Ethernet
- [VIO PAYLOAD CONFIGURATION](https://docs.gremsy.com/payloads/vio/ethernet-video-stream/vio-payload-configuration.md): Configure the VIO IP to stream and control over Ethernet
- [ETHERNET RECEIVER CONFIGURATION](https://docs.gremsy.com/payloads/vio/ethernet-video-stream/ethernet-receiver-configuration.md): Get the video streaming over ethernet by following correspond guidance below
- [Change RTSP streaming paramters via SD Card](https://docs.gremsy.com/payloads/vio/ethernet-video-stream/change-rtsp-streaming-paramters-via-sd-card.md): This function is no longer support from VIO Software v1.0.4.2 or higher.
- [ETHERNET TELEMETRY PAYLOAD CONTROL](https://docs.gremsy.com/payloads/vio/ethernet-telemetry-payload-control.md)
- [Setup with Herelink](https://docs.gremsy.com/payloads/vio/ethernet-telemetry-payload-control/setup-with-herelink.md): This is an example to setup the Vio works with ethernet telemetry on Herelink system v1.1
- [PINPOINT - ESTIMATE TARGET LOCATION](https://docs.gremsy.com/payloads/vio/pinpoint-estimate-target-location.md)
- [Laser Range Finder target point](https://docs.gremsy.com/payloads/vio/pinpoint-estimate-target-location/laser-range-finder-target-point.md)
- [On-Screen Display Target Location](https://docs.gremsy.com/payloads/vio/pinpoint-estimate-target-location/on-screen-display-target-location.md)
- [Verify the Estimate Location](https://docs.gremsy.com/payloads/vio/pinpoint-estimate-target-location/verify-the-estimate-location.md)
- [Tracking and AI Object Detection](https://docs.gremsy.com/payloads/vio/tracking-and-ai-object-detection.md)
- [Types of Tracking](https://docs.gremsy.com/payloads/vio/tracking-and-ai-object-detection/types-of-tracking.md)
- [Perform the Tracking](https://docs.gremsy.com/payloads/vio/tracking-and-ai-object-detection/perform-the-tracking.md)
- [UPGRADE](https://docs.gremsy.com/payloads/vio/upgrade.md)
- [SOFTWARE VERSION](https://docs.gremsy.com/payloads/vio/upgrade/software-version.md)
- [TROUBLESHOOTING](https://docs.gremsy.com/payloads/vio/troubleshooting.md): This page summary of common customer errors and how to handle them.
- [Case Study](https://docs.gremsy.com/payloads/vio/case-study.md)
- [LYNX](https://docs.gremsy.com/gremsy-tiny-series/lynx.md)
- [FAQ?](https://docs.gremsy.com/gremsy-tiny-series/lynx/faq.md)
- [GENERAL](https://docs.gremsy.com/gremsy-tiny-series/lynx/general.md): Specifications are subject to change. Product is currently in release phase.
- [HARDWARE CONFIGURATION](https://docs.gremsy.com/gremsy-tiny-series/lynx/hardware-configuration.md)
- [MOUNTING](https://docs.gremsy.com/gremsy-tiny-series/lynx/hardware-configuration/mounting.md)
- [Connection Diagram](https://docs.gremsy.com/gremsy-tiny-series/lynx/hardware-configuration/connection-diagram.md)
- [I/O Connection](https://docs.gremsy.com/gremsy-tiny-series/lynx/hardware-configuration/i-o-connection.md)
- [LYNX PAYLOAD](https://docs.gremsy.com/gremsy-tiny-series/lynx/hardware-configuration/i-o-connection/lynx-payload.md)
- [MAINBOARD](https://docs.gremsy.com/gremsy-tiny-series/lynx/hardware-configuration/i-o-connection/mainboard.md)
- [SOFTWARE CONFIGURATION](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration.md)
- [gTune Desktop](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/gtune-desktop.md)
- [WEB SETTING APP](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app.md)
- [SYSTEMS](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/systems.md)
- [GENERAL SETTING](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/systems/general-setting.md)
- [IP ADDRESS](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/systems/ip-address.md)
- [PiP Configuration](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/systems/pip-configuration.md)
- [LOCALIZATION](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/systems/localization.md)
- [VIDEO STREAM](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/video-stream.md)
- [Stream General Settings](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/video-stream/stream-general-settings.md)
- [EO Stream Settings](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/video-stream/eo-stream-settings.md)
- [IR Stream Settings](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/video-stream/ir-stream-settings.md)
- [MAVLINK](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/mavlink.md)
- [GIMBAL](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/gimbal.md)
- [IR CAMERA](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/ir-camera.md)
- [Lynx Standard](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/ir-camera/lynx-standard.md)
- [Setup Radiometric Environment Factors](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/ir-camera/lynx-standard/setup-radiometric-environment-factors.md)
- [Isotherms Regions](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/ir-camera/lynx-standard/isotherms-regions.md)
- [Lynx NDAA](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/ir-camera/lynx-ndaa.md)
- [Environmental Factors](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/ir-camera/lynx-ndaa/environmental-factors.md)
- [Isotherms Regions](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/ir-camera/lynx-ndaa/isotherms-regions.md)
- [IR Camera](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/ir-camera/ir-camera.md)
- [Media Files](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/media-files.md)
- [REMOTE CHANNELS](https://docs.gremsy.com/gremsy-tiny-series/lynx/software-configuration/web-setting-app/remote-channels.md)
- [THIRD PARTIES INTEGRATION](https://docs.gremsy.com/gremsy-tiny-series/lynx/third-parties-integration.md)
- [MAVLINK AUTOPILOT](https://docs.gremsy.com/gremsy-tiny-series/lynx/third-parties-integration/mavlink-autopilot.md)
- [SETUP WITH ARDUPILOT](https://docs.gremsy.com/gremsy-tiny-series/lynx/third-parties-integration/mavlink-autopilot/setup-with-ardupilot.md)
- [SETUP WITH PX4](https://docs.gremsy.com/gremsy-tiny-series/lynx/third-parties-integration/mavlink-autopilot/setup-with-px4.md)
- [SETUP WITH SKYNODE](https://docs.gremsy.com/gremsy-tiny-series/lynx/third-parties-integration/mavlink-autopilot/setup-with-skynode.md)
- [COMPANION COMPUTER FOR UAV & ROBOTICS PLATFORM](https://docs.gremsy.com/gremsy-tiny-series/lynx/third-parties-integration/companion-computer-for-uav-and-robotics-platform.md)
- [PAYLOAD SETTING](https://docs.gremsy.com/gremsy-tiny-series/lynx/payload-setting.md)
- [Payload Definition File Download](https://docs.gremsy.com/gremsy-tiny-series/lynx/payload-setting/payload-definition-file-download.md)
- [Payload Settings Menu](https://docs.gremsy.com/gremsy-tiny-series/lynx/payload-setting/payload-settings-menu.md)
- [UPGRADE](https://docs.gremsy.com/gremsy-tiny-series/lynx/upgrade.md)
- [FIRMWARE](https://docs.gremsy.com/gremsy-tiny-series/lynx/upgrade/firmware.md)
- [SOFTWARE](https://docs.gremsy.com/gremsy-tiny-series/lynx/upgrade/software.md)
- [G-HADRON](https://docs.gremsy.com/tiny-gimbal/g-hadron.md)
- [FAQ](https://docs.gremsy.com/tiny-gimbal/g-hadron/faq.md)
- [GETTING STARTED](https://docs.gremsy.com/tiny-gimbal/g-hadron/getting-started.md)
- [Specification](https://docs.gremsy.com/tiny-gimbal/g-hadron/getting-started/specification.md)
- [Connection Diagram](https://docs.gremsy.com/tiny-gimbal/g-hadron/getting-started/connection-diagram.md)
- [I/O Connection](https://docs.gremsy.com/tiny-gimbal/g-hadron/getting-started/i-o-connection.md)
- [LED Status Indicator](https://docs.gremsy.com/tiny-gimbal/g-hadron/getting-started/led-status-indicator.md)
- [GIMBAL SETUP](https://docs.gremsy.com/tiny-gimbal/g-hadron/gimbal-setup.md)
- [Camera Installation](https://docs.gremsy.com/tiny-gimbal/g-hadron/gimbal-setup/camera-installation.md)
- [Gimbal Mounting](https://docs.gremsy.com/tiny-gimbal/g-hadron/gimbal-setup/gimbal-mounting.md)
- [CAMERA SETTING MENU](https://docs.gremsy.com/tiny-gimbal/g-hadron/camera-setting-menu.md): G-HADRON
- [Camera Definition File Download](https://docs.gremsy.com/tiny-gimbal/g-hadron/camera-setting-menu/camera-definition-file-download.md)
- [Camera Settings Menu](https://docs.gremsy.com/tiny-gimbal/g-hadron/camera-setting-menu/camera-settings-menu.md)
- [GIMBAL DEVICE SETTING](https://docs.gremsy.com/tiny-gimbal/g-hadron/gimbal-device-setting.md)
- [UPGRADE](https://docs.gremsy.com/tiny-gimbal/g-hadron/upgrade.md)
- [UPGRADE GIMBAL FIRMWARE](https://docs.gremsy.com/tiny-gimbal/g-hadron/upgrade/upgrade-gimbal-firmware.md)
- [UPGRADE G-HARDON MAINBOARD FIRMWARE](https://docs.gremsy.com/tiny-gimbal/g-hadron/upgrade/upgrade-g-hardon-mainboard-firmware.md)
- [DOWNLOAD](https://docs.gremsy.com/tiny-gimbal/g-hadron/download.md): Tiny Gimbal: G-Hadron
- [ADVANCED FEATURES](https://docs.gremsy.com/tiny-gimbal/g-hadron/advanced-features.md)
- [AUTOPILOT SETUP](https://docs.gremsy.com/tiny-gimbal/g-hadron/autopilot-setup.md)
- [SETUP WITH PX4](https://docs.gremsy.com/tiny-gimbal/g-hadron/autopilot-setup/setup-with-px4.md)
- [SETUP WITH ARDUPILOT](https://docs.gremsy.com/tiny-gimbal/g-hadron/autopilot-setup/setup-with-ardupilot.md)
- [Q-GROUND CONTROL SETUP](https://docs.gremsy.com/tiny-gimbal/g-hadron/q-ground-control-setup.md)
- [I. HDMI VIDEO STREAMING](https://docs.gremsy.com/tiny-gimbal/g-hadron/q-ground-control-setup/i.-hdmi-video-streaming.md)
- [II. ETHERNET VIDEO STREAMING](https://docs.gremsy.com/tiny-gimbal/g-hadron/q-ground-control-setup/ii.-ethernet-video-streaming.md)
- [CONTROL BY SBUS REMOTE CONTROLLER](https://docs.gremsy.com/tiny-gimbal/g-hadron/control-by-sbus-remote-controller.md)
- [PAYLOAD ASSISTANT APP](https://docs.gremsy.com/tiny-gimbal/g-hadron/payload-assistant-app.md)
- [GREMSY PAYLOADSDK](https://docs.gremsy.com/tiny-gimbal/g-hadron/gremsy-payloadsdk.md): Tiny Gimbal: G-hadron
- [ETHERNET TELEMETRY PAYLOAD CONTROL](https://docs.gremsy.com/tiny-gimbal/g-hadron/ethernet-telemetry-payload-control.md): G-hadron supports control over Ethernet telemetry. Please update to the latest firmware and follow the following instructions:
- [PAYLOAD WEB SERVER](https://docs.gremsy.com/tiny-gimbal/g-hadron/payload-web-server.md)
- [TROUBLESHOOTING](https://docs.gremsy.com/tiny-gimbal/g-hadron/troubleshooting.md): This page summary of common customer errors and how to handle them.
- [GENERAL](https://docs.gremsy.com/gimbals/general.md)
- [Gimbal Configuration](https://docs.gremsy.com/gimbals/general/gimbal-configuration.md)
- [Gimbal Tunning](https://docs.gremsy.com/gimbals/general/gimbal-configuration/gimbal-tunning.md)
- [Stiffness Tunning](https://docs.gremsy.com/gimbals/general/gimbal-configuration/gimbal-tunning/stiffness-tunning.md): Stiffness setting has a significant impact on the performance of the Pixy S. This setting adjusts the degrees to which the gimbal tries to correct for unwanted camera movement and hold the camera.
- [Filter](https://docs.gremsy.com/gimbals/general/gimbal-configuration/gimbal-tunning/filter.md)
- [Gimbal Control](https://docs.gremsy.com/gimbals/general/gimbal-configuration/gimbal-control.md): Pixy S Gimbal Control Settings
- [Follow Mode Settings](https://docs.gremsy.com/gimbals/general/gimbal-configuration/follow-mode-settings.md)
- [Rotation Limit](https://docs.gremsy.com/gimbals/general/gimbal-configuration/rotation-limit.md)
- [IMU](https://docs.gremsy.com/gimbals/general/gimbal-configuration/imu.md)
- [Gimbal LED Indicator](https://docs.gremsy.com/gimbals/general/gimbal-led-indicator.md)
- [Autopilot Setup](https://docs.gremsy.com/gimbals/general/autopilot-setup.md)
- [PX4](https://docs.gremsy.com/gimbals/general/autopilot-setup/px4.md)
- [Ardupilot](https://docs.gremsy.com/gimbals/general/autopilot-setup/ardupilot.md): We recommend connecting the gimbal’s COM2 port to one of the autopilot’s Serial/Telemetry ports like Telem2, as shown above.
- [REMOTE CONTROL](https://docs.gremsy.com/gimbals/general/remote-control.md)
- [SBUS/PPM Receiver Connection](https://docs.gremsy.com/gimbals/general/remote-control/sbus-ppm-receiver-connection.md)
- [Control Channel Configuration](https://docs.gremsy.com/gimbals/general/remote-control/control-channel-configuration.md)
- [Gimbal Firmware](https://docs.gremsy.com/gimbals/general/gimbal-firmware.md)
- [Pixy LR](https://docs.gremsy.com/gimbals/pixy-lr.md)
- [FAQ](https://docs.gremsy.com/gimbals/pixy-lr/faq.md)
- [GETTING STARTED](https://docs.gremsy.com/gimbals/pixy-lr/getting-started.md)
- [Introduction](https://docs.gremsy.com/gimbals/pixy-lr/getting-started/introduction.md): Designed for the Sony ILX-LR1, Pixy LR provides professionals with a specialized payload for high-quality imaging and seamless aerial operations in industrial applications.
- [Specification](https://docs.gremsy.com/gimbals/pixy-lr/getting-started/specification.md)
- [I/O Connection](https://docs.gremsy.com/gimbals/pixy-lr/getting-started/i-o-connection.md): PIXY LR
- [What's in the box?](https://docs.gremsy.com/gimbals/pixy-lr/getting-started/whats-in-the-box.md)
- [Gimbal LED Indicator](https://docs.gremsy.com/gimbals/pixy-lr/getting-started/gimbal-led-indicator.md)
- [Gimbal Balance](https://docs.gremsy.com/gimbals/pixy-lr/getting-started/gimbal-balance.md)
- [Camera Mounting](https://docs.gremsy.com/gimbals/pixy-lr/getting-started/camera-mounting.md): Pixy LR
- [Damping Mounting](https://docs.gremsy.com/gimbals/pixy-lr/getting-started/damping-mounting.md)
- [Trouble Shooting](https://docs.gremsy.com/gimbals/pixy-lr/getting-started/trouble-shooting.md)
- [Connection Diagram](https://docs.gremsy.com/gimbals/pixy-lr/connection-diagram.md)
- [Set up with PX4](https://docs.gremsy.com/gimbals/pixy-lr/set-up-with-px4.md)
- [Setup with Ardupilot](https://docs.gremsy.com/gimbals/pixy-lr/setup-with-ardupilot.md)
- [Setup with Cube Pilot & Herelink](https://docs.gremsy.com/gimbals/pixy-lr/setup-with-cube-pilot-and-herelink.md)
- [Set up with Airpeak](https://docs.gremsy.com/gimbals/pixy-lr/set-up-with-airpeak.md)
- [AIRPIXEL ENTIRE SET INSTALLATION FOR CUBE PILOT/PIXHAWK](https://docs.gremsy.com/gimbals/pixy-lr/airpixel-entire-set-installation-for-cube-pilot-pixhawk.md)
- [SETUP CAMERA STRINGER](https://docs.gremsy.com/gimbals/pixy-lr/setup-camera-stringer.md)
- [Pixy LR TWO-AXIS](https://docs.gremsy.com/gimbals/pixy-lr-two-axis.md)
- [FAQ](https://docs.gremsy.com/gimbals/pixy-lr-two-axis/faq.md)
- [GETTING STARTED](https://docs.gremsy.com/gimbals/pixy-lr-two-axis/getting-started.md)
- [Introduction](https://docs.gremsy.com/gimbals/pixy-lr-two-axis/getting-started/introduction.md)
- [Specification](https://docs.gremsy.com/gimbals/pixy-lr-two-axis/getting-started/specification.md)
- [Operation Mode](https://docs.gremsy.com/gimbals/pixy-lr-two-axis/getting-started/operation-mode.md)
- [I/O Connection](https://docs.gremsy.com/gimbals/pixy-lr-two-axis/getting-started/i-o-connection.md)
- [What's in the box?](https://docs.gremsy.com/gimbals/pixy-lr-two-axis/getting-started/whats-in-the-box.md)
- [Gimbal LED Indicator](https://docs.gremsy.com/gimbals/pixy-lr-two-axis/getting-started/gimbal-led-indicator.md)
- [Gimbal Balance](https://docs.gremsy.com/gimbals/pixy-lr-two-axis/getting-started/gimbal-balance.md)
- [Camera Mounting](https://docs.gremsy.com/gimbals/pixy-lr-two-axis/getting-started/camera-mounting.md)
- [Damping Mounting](https://docs.gremsy.com/gimbals/pixy-lr-two-axis/getting-started/damping-mounting.md)
- [Trouble Shooting](https://docs.gremsy.com/gimbals/pixy-lr-two-axis/getting-started/trouble-shooting.md)
- [Pixy LR SP](https://docs.gremsy.com/gimbals/pixy-lr-sp.md)
- [FAQ](https://docs.gremsy.com/gimbals/pixy-lr-sp/faq.md)
- [GETTING STARTED](https://docs.gremsy.com/gimbals/pixy-lr-sp/getting-started.md)
- [Introduction](https://docs.gremsy.com/gimbals/pixy-lr-sp/getting-started/introduction.md)
- [Specification](https://docs.gremsy.com/gimbals/pixy-lr-sp/getting-started/specification.md)
- [I/O Connection](https://docs.gremsy.com/gimbals/pixy-lr-sp/getting-started/i-o-connection.md): Pixy LR-Sport will be used with the S-PORT, which will help users plug and unplug the camera in or out of the drone as fast as possible.
- [What's in the box?](https://docs.gremsy.com/gimbals/pixy-lr-sp/getting-started/whats-in-the-box.md)
- [Gimbal LED Indicator](https://docs.gremsy.com/gimbals/pixy-lr-sp/getting-started/gimbal-led-indicator.md)
- [Gimbal Balance](https://docs.gremsy.com/gimbals/pixy-lr-sp/getting-started/gimbal-balance.md): This information page will help users balance the gimbal more easily.
- [Camera Mounting](https://docs.gremsy.com/gimbals/pixy-lr-sp/getting-started/camera-mounting.md)
- [CONNECTION DIAGRAM](https://docs.gremsy.com/gimbals/pixy-lr-sp/connection-diagram.md)
- [PAYLOAD CONNECTION](https://docs.gremsy.com/gimbals/pixy-lr-sp/payload-connection.md)
- [INSTALLATION](https://docs.gremsy.com/gimbals/pixy-lr-sp/installation.md)
- [VioZio Control Cable](https://docs.gremsy.com/gimbals/pixy-lr-sp/installation/viozio-control-cable.md)
- [Setup with the Ardupilot System](https://docs.gremsy.com/gimbals/pixy-lr-sp/installation/viozio-control-cable/setup-with-the-ardupilot-system.md): VioZio Control Cable Update April 2026
- [ENTIRE AIRPIXEL CONFIGURATION](https://docs.gremsy.com/gimbals/pixy-lr-sp/installation/viozio-control-cable/entire-airpixel-configuration.md)
- [CAMERA CONFIGURATION](https://docs.gremsy.com/gimbals/pixy-lr-sp/installation/viozio-control-cable/camera-configuration.md)
- [GIMBAL CONFIGURATION](https://docs.gremsy.com/gimbals/pixy-lr-sp/installation/viozio-control-cable/gimbal-configuration.md)
- [CONTROL GIMBAL & CAMERA](https://docs.gremsy.com/gimbals/pixy-lr-sp/installation/viozio-control-cable/control-gimbal-and-camera.md)
- [SETUP WITH MAVLINK PASSTHROUGH](https://docs.gremsy.com/gimbals/pixy-lr-sp/installation/viozio-control-cable/setup-with-mavlink-passthrough.md)
- [Setup with the Ardupilot system for Siyi Remote](https://docs.gremsy.com/gimbals/pixy-lr-sp/installation/viozio-control-cable/setup-with-the-ardupilot-system-for-siyi-remote.md): Setup with the Ardupilot system for Siyi Remote (MK15, MK32)
- [Evo Control Cable](https://docs.gremsy.com/gimbals/pixy-lr-sp/installation/evo-control-cable.md)
- [Setup with the Ardupilot system](https://docs.gremsy.com/gimbals/pixy-lr-sp/installation/evo-control-cable/setup-with-the-ardupilot-system.md): Evo Control Cable
- [MIO](https://docs.gremsy.com/gimbals/mio.md)
- [FAQ](https://docs.gremsy.com/gimbals/mio/faq.md): MIO
- [GETTING STARTED](https://docs.gremsy.com/gimbals/mio/getting-started.md)
- [Introduction](https://docs.gremsy.com/gimbals/mio/getting-started/introduction.md): MIO
- [Specification](https://docs.gremsy.com/gimbals/mio/getting-started/specification.md)
- [I/O Connection](https://docs.gremsy.com/gimbals/mio/getting-started/i-o-connection.md): Mio will be used with the S-PORT, which will help users plug and unplug the camera in or out of the drone as fast as possible.
- [What's in the box?](https://docs.gremsy.com/gimbals/mio/getting-started/whats-in-the-box.md): MIO
- [OPERATION MODES](https://docs.gremsy.com/gimbals/mio/operation-modes.md)
- [BALANCING](https://docs.gremsy.com/gimbals/mio/balancing.md): MIO GIMBAL
- [GIMBAL CONFIGURATION](https://docs.gremsy.com/gimbals/mio/gimbal-configuration.md): After the camera is balanced on the MIO, it’s time to fine tune some parameters for best performance.
- [FOLLOW MODE SETTINGS](https://docs.gremsy.com/gimbals/mio/gimbal-configuration/follow-mode-settings.md)
- [IMU SENSOR](https://docs.gremsy.com/gimbals/mio/gimbal-configuration/imu-sensor.md)
- [REMOTE CONTROL](https://docs.gremsy.com/gimbals/mio/remote-control.md): MIO
- [SBUS/PPM SETTINGS](https://docs.gremsy.com/gimbals/mio/remote-control/sbus-ppm-settings.md)
- [M600/M600 PRO](https://docs.gremsy.com/gimbals/mio/m600-m600-pro.md): MIO
- [HERELINK](https://docs.gremsy.com/gimbals/mio/herelink.md): MIO
- [PIXHAWK - MIO - FLIR DUO PRO R](https://docs.gremsy.com/gimbals/mio/pixhawk-mio-flir-duo-pro-r.md)
- [MIO TWO-AXIS](https://docs.gremsy.com/gimbals/mio-two-axis.md)
- [Getting Started](https://docs.gremsy.com/gimbals/mio-two-axis/getting-started.md)
- [Specification](https://docs.gremsy.com/gimbals/mio-two-axis/getting-started/specification.md)
- [Dimension](https://docs.gremsy.com/gimbals/mio-two-axis/getting-started/dimension.md)
- [I/O Connection](https://docs.gremsy.com/gimbals/mio-two-axis/getting-started/i-o-connection.md)
- [Hardware Setup](https://docs.gremsy.com/gimbals/mio-two-axis/hardware-setup.md)
- [Mounting](https://docs.gremsy.com/gimbals/mio-two-axis/hardware-setup/mounting.md)
- [Software Setup](https://docs.gremsy.com/gimbals/mio-two-axis/software-setup.md)
- [Setup with Ardupilot](https://docs.gremsy.com/gimbals/mio-two-axis/software-setup/setup-with-ardupilot.md)
- [PIXY WE](https://docs.gremsy.com/gimbals/pixy-we.md)
- [GETTING STARTED](https://docs.gremsy.com/gimbals/pixy-we/getting-started.md)
- [Introduction](https://docs.gremsy.com/gimbals/pixy-we/getting-started/introduction.md)
- [Features](https://docs.gremsy.com/gimbals/pixy-we/getting-started/features.md)
- [Specification](https://docs.gremsy.com/gimbals/pixy-we/getting-started/specification.md)
- [Mounting](https://docs.gremsy.com/gimbals/pixy-we/getting-started/mounting.md)
- [I/O Connection](https://docs.gremsy.com/gimbals/pixy-we/getting-started/i-o-connection.md): Pixy WE
- [What's in the box?](https://docs.gremsy.com/gimbals/pixy-we/getting-started/whats-in-the-box.md)
- [Troubleshooting](https://docs.gremsy.com/gimbals/pixy-we/troubleshooting.md)
- [Check communication with the workswell cameras](https://docs.gremsy.com/gimbals/pixy-we/troubleshooting/check-communication-with-the-workswell-cameras.md): This information will provide instructions for checking communication with Workswell Wiris Enterprise cameras by Terminal for Pixy WE and Pixy WP
- [PIXY U](https://docs.gremsy.com/gimbals/pixy-u.md)
- [GENERAL](https://docs.gremsy.com/gimbals/pixy-u/general.md)
- [GETTING STARTED](https://docs.gremsy.com/gimbals/pixy-u/getting-started.md)
- [Mounting Hyper Quick Release](https://docs.gremsy.com/gimbals/pixy-u/getting-started/mounting-hyper-quick-release.md)
- [Balance](https://docs.gremsy.com/gimbals/pixy-u/getting-started/balance.md)
- [I/O CONNECTION](https://docs.gremsy.com/gimbals/pixy-u/getting-started/i-o-connection.md)
- [AUTOPILOT SETUP](https://docs.gremsy.com/gimbals/pixy-u/autopilot-setup.md)
- [REMOTE CONTROL SETUP](https://docs.gremsy.com/gimbals/pixy-u/remote-control-setup.md)
- [M600 (A3 + LIGHBRIDGE 2)](https://docs.gremsy.com/gimbals/pixy-u/m600-a3-+-lighbridge-2.md): PIXY U
- [Pixy S](https://docs.gremsy.com/gimbals/pixy-s.md)
- [FAQ](https://docs.gremsy.com/gimbals/pixy-s/faq.md)
- [User Manual](https://docs.gremsy.com/gimbals/pixy-s/user-manual.md)
- [Getting Started](https://docs.gremsy.com/gimbals/pixy-s/user-manual/getting-started.md)
- [Introduction](https://docs.gremsy.com/gimbals/pixy-s/user-manual/getting-started/introduction.md)
- [Key Feature](https://docs.gremsy.com/gimbals/pixy-s/user-manual/getting-started/key-feature.md)
- [Specification](https://docs.gremsy.com/gimbals/pixy-s/user-manual/getting-started/specification.md)
- [I/O Connections](https://docs.gremsy.com/gimbals/pixy-s/user-manual/getting-started/i-o-connections.md): Pixy S will be used with the HDMI HYPER QUICK RELEASE V2.0
- [What's in the box?](https://docs.gremsy.com/gimbals/pixy-s/user-manual/getting-started/whats-in-the-box.md)
- [Powering Up](https://docs.gremsy.com/gimbals/pixy-s/user-manual/getting-started/powering-up.md)
- [Operation Mode](https://docs.gremsy.com/gimbals/pixy-s/user-manual/getting-started/operation-mode.md)
- [Gimbal Mode](https://docs.gremsy.com/gimbals/pixy-s/user-manual/getting-started/gimbal-mode.md)
- [Gimbal Balancing](https://docs.gremsy.com/gimbals/pixy-s/user-manual/gimbal-balancing.md)
- [Firmware and Software](https://docs.gremsy.com/gimbals/pixy-s/user-manual/firmware-and-software.md): This page update the latest fimrware and software version for Pixy S
- [Drone System Connection Diagram](https://docs.gremsy.com/gimbals/pixy-s/user-manual/drone-system-connection-diagram.md): The simple diagram to show how to connect the Pixy S with supported flight controller and drone system
- [Cube Pilot Connection Diagram](https://docs.gremsy.com/gimbals/pixy-s/user-manual/drone-system-connection-diagram/cube-pilot-connection-diagram.md)
- [Skynode Connection Diagram](https://docs.gremsy.com/gimbals/pixy-s/user-manual/drone-system-connection-diagram/skynode-connection-diagram.md)
- [Trouble Shooting](https://docs.gremsy.com/gimbals/pixy-s/user-manual/trouble-shooting.md)
- [GREMSY T3V3](https://docs.gremsy.com/gimbals/gremsy-t3v3.md)
- [FAQ](https://docs.gremsy.com/gimbals/gremsy-t3v3/faq.md)
- [GETTING STARTED](https://docs.gremsy.com/gimbals/gremsy-t3v3/getting-started.md): GREMSY T3V3
- [FEATURES](https://docs.gremsy.com/gimbals/gremsy-t3v3/getting-started/features.md)
- [SPECIFICATION](https://docs.gremsy.com/gimbals/gremsy-t3v3/getting-started/specification.md)
- [I/O Connection](https://docs.gremsy.com/gimbals/gremsy-t3v3/getting-started/i-o-connection.md)
- [OPERATION MODE](https://docs.gremsy.com/gimbals/gremsy-t3v3/getting-started/operation-mode.md)
- [MOUNTING & BALANCE](https://docs.gremsy.com/gimbals/gremsy-t3v3/getting-started/mounting-and-balance.md)
- [REMOTE CONTROL](https://docs.gremsy.com/gimbals/gremsy-t3v3/remote-control.md): GREMSY T3V3
- [SBUS/PPM SETTINGS](https://docs.gremsy.com/gimbals/gremsy-t3v3/remote-control/sbus-ppm-settings.md)
- [JR/SPEKTRUM SETTINGS](https://docs.gremsy.com/gimbals/gremsy-t3v3/remote-control/jr-spektrum-settings.md)
- [PIXHAWK](https://docs.gremsy.com/gimbals/gremsy-t3v3/remote-control/pixhawk.md)
- [M600](https://docs.gremsy.com/gimbals/gremsy-t3v3/remote-control/m600.md)
- [GREMSY TWO-AXIS T3V3](https://docs.gremsy.com/gimbals/gremsy-two-axis-t3v3.md)
- [GETTING STARTED](https://docs.gremsy.com/gimbals/gremsy-two-axis-t3v3/getting-started.md)
- [INTRODUCTION](https://docs.gremsy.com/gimbals/gremsy-two-axis-t3v3/getting-started/introduction.md): Two-axis T3V3
- [SPECIFICATION](https://docs.gremsy.com/gimbals/gremsy-two-axis-t3v3/getting-started/specification.md): Two-axis T3V3
- [POWERING UP](https://docs.gremsy.com/gimbals/gremsy-two-axis-t3v3/getting-started/powering-up.md): Two-axis T3V3
- [GIMBAL MODE](https://docs.gremsy.com/gimbals/gremsy-two-axis-t3v3/getting-started/gimbal-mode.md): Switching Between Modes
- [OPERATION MODE](https://docs.gremsy.com/gimbals/gremsy-two-axis-t3v3/getting-started/operation-mode.md): The two-axis T3V3 can be readily installed under the aircraft using the standard damping system. Please note that a damping adaptor must be installed if you use drones with short-landing gear.
- [STATUS LED INDICATOR](https://docs.gremsy.com/gimbals/gremsy-two-axis-t3v3/getting-started/status-led-indicator.md): Two-axis T3V3
- [I/O CONNECTIONS](https://docs.gremsy.com/gimbals/gremsy-two-axis-t3v3/getting-started/i-o-connections.md): Two-axis T3V3
- [GREMSY T3PE](https://docs.gremsy.com/gimbals/gremsy-t3pe.md)
- [GENERAL](https://docs.gremsy.com/gimbals/gremsy-t3pe/general.md): GREMSY T3V3
- [CAMERA](https://docs.gremsy.com/gimbals/gremsy-t3pe/camera.md): GREMSY T3V3
- [CONTROL](https://docs.gremsy.com/gimbals/gremsy-t3pe/control.md): GREMSY T3V3
- [Skynode](https://docs.gremsy.com/gimbals/gremsy-t3pe/skynode.md): GREMSY T3V3
- [M600](https://docs.gremsy.com/gimbals/gremsy-t3pe/m600.md): GREMSY T7
- [Cube Pilot](https://docs.gremsy.com/gimbals/gremsy-t3pe/cube-pilot.md): GREMSY T3V3
- [I/O Connection](https://docs.gremsy.com/gimbals/gremsy-t3pe/i-o-connection.md): T3PE I/o connection
- [GREMSY T7](https://docs.gremsy.com/gimbals/gremsy-t7.md)
- [GENERAL](https://docs.gremsy.com/gimbals/gremsy-t7/general.md): GREMSY T7
- [I/O Connection](https://docs.gremsy.com/gimbals/gremsy-t7/i-o-connection.md): GREMSY T7
- [CAMERA](https://docs.gremsy.com/gimbals/gremsy-t7/camera.md): GREMSY T7
- [CONTROL](https://docs.gremsy.com/gimbals/gremsy-t7/control.md): GREMSY T7
- [M600](https://docs.gremsy.com/gimbals/gremsy-t7/m600.md): GREMSY T7
- [PIXHAWK](https://docs.gremsy.com/gimbals/gremsy-t7/pixhawk.md): GREMSY T7
- [AEVO](https://docs.gremsy.com/gimbals/aevo.md)
- [FAQ](https://docs.gremsy.com/gimbals/aevo/faq.md)
- [GETTING STARTED](https://docs.gremsy.com/gimbals/aevo/getting-started.md): User Manual
- [Introduction](https://docs.gremsy.com/gimbals/aevo/getting-started/introduction.md)
- [Features](https://docs.gremsy.com/gimbals/aevo/getting-started/features.md)
- [Specification](https://docs.gremsy.com/gimbals/aevo/getting-started/specification.md)
- [I/O Connectors](https://docs.gremsy.com/gimbals/aevo/getting-started/i-o-connectors.md)
- [What's in the box?](https://docs.gremsy.com/gimbals/aevo/getting-started/whats-in-the-box.md)
- [Quick Release](https://docs.gremsy.com/gimbals/aevo/getting-started/quick-release.md)
- [Powering Up](https://docs.gremsy.com/gimbals/aevo/getting-started/powering-up.md)
- [Status LED Indicator](https://docs.gremsy.com/gimbals/aevo/getting-started/status-led-indicator.md)
- [Operation Mode](https://docs.gremsy.com/gimbals/aevo/getting-started/operation-mode.md)
- [Gimbal Mode](https://docs.gremsy.com/gimbals/aevo/getting-started/gimbal-mode.md)
- [CAMERA MOUNTING & BALANCING](https://docs.gremsy.com/gimbals/aevo/camera-mounting-and-balancing.md)
- [Mounting The Camera](https://docs.gremsy.com/gimbals/aevo/camera-mounting-and-balancing/mounting-the-camera.md)
- [Tilt Axis Balance](https://docs.gremsy.com/gimbals/aevo/camera-mounting-and-balancing/tilt-axis-balance.md)
- [Tilt Up-Down Balance](https://docs.gremsy.com/gimbals/aevo/camera-mounting-and-balancing/tilt-axis-balance/tilt-up-down-balance.md)
- [Tilt Front-Back Balance](https://docs.gremsy.com/gimbals/aevo/camera-mounting-and-balancing/tilt-axis-balance/tilt-front-back-balance.md)
- [Roll Axis Balance](https://docs.gremsy.com/gimbals/aevo/camera-mounting-and-balancing/roll-axis-balance.md)
- [Pan Axis Balance](https://docs.gremsy.com/gimbals/aevo/camera-mounting-and-balancing/pan-axis-balance.md)
- [GIMBAL CONFIGURATION](https://docs.gremsy.com/gimbals/aevo/gimbal-configuration.md)
- [Stiffness Tunning](https://docs.gremsy.com/gimbals/aevo/gimbal-configuration/stiffness-tunning.md): Stiffness setting has a significant impact on the performance of the T7. This setting adjusts the degrees to which the gimbal tries to correct for unwanted camera movement and hold the camera stable.
- [Filter](https://docs.gremsy.com/gimbals/aevo/gimbal-configuration/filter.md)
- [Follow Mode Settings](https://docs.gremsy.com/gimbals/aevo/gimbal-configuration/follow-mode-settings.md)
- [Rotation Limit](https://docs.gremsy.com/gimbals/aevo/gimbal-configuration/rotation-limit.md)
- [IMU](https://docs.gremsy.com/gimbals/aevo/gimbal-configuration/imu.md)
- [REMOTE CONTROL](https://docs.gremsy.com/gimbals/aevo/remote-control.md)
- [SBUS/PPM Receiver Connection](https://docs.gremsy.com/gimbals/aevo/remote-control/sbus-ppm-receiver-connection.md)
- [JR/SPEKTRUM Receiver Connection](https://docs.gremsy.com/gimbals/aevo/remote-control/jr-spektrum-receiver-connection.md)
- [Control Channel Configuration](https://docs.gremsy.com/gimbals/aevo/remote-control/control-channel-configuration.md)
- [INSTALLING SOFTWARE](https://docs.gremsy.com/gimbals/aevo/installing-software.md)
- [UPGRADING FIRMWARE](https://docs.gremsy.com/gimbals/aevo/upgrading-firmware.md): Aevo
- [TROUBLESHOOTING](https://docs.gremsy.com/gimbals/aevo/troubleshooting.md)
- [GENERAL](https://docs.gremsy.com/gimbals-for-m300-m350/general.md)
- [DIRECT GEOTAG](https://docs.gremsy.com/gimbals-for-m300-m350/general/direct-geotag.md)
- [UPGRADE FIRMWARE](https://docs.gremsy.com/gimbals-for-m300-m350/general/upgrade-firmware.md)
- [UPGRADE SOM FIRMWARE](https://docs.gremsy.com/gimbals-for-m300-m350/general/upgrade-som-firmware.md): Pixy SM
- [UPGRADE GUIDANCE TO WORK WITH M350 (APPLY FOR OLD PIXY SM UNIT)](https://docs.gremsy.com/gimbals-for-m300-m350/general/upgrade-guidance-to-work-with-m350-apply-for-old-pixy-sm-unit.md)
- [SOM Firmware upgrade via SD card](https://docs.gremsy.com/gimbals-for-m300-m350/general/som-firmware-upgrade-via-sd-card.md)
- [Troubleshooting](https://docs.gremsy.com/gimbals-for-m300-m350/general/troubleshooting.md)
- [PIXY SM](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm.md)
- [FAQ](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/faq.md): PIXY SM
- [GETTING STARTED](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/getting-started.md)
- [Introduction](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/getting-started/introduction.md)
- [Specification](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/getting-started/specification.md): Pixy SM
- [I/O Connection](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/getting-started/i-o-connection.md): Pixy SM
- [What's in the box?](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/getting-started/whats-in-the-box.md): Pixy SM
- [BALANCING](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/getting-started/balancing.md)
- [DAMPING ASSEMBLY GUIDE](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/damping-assembly-guide.md): PIXY SM
- [MAPPING MISSION INSTRUCTION](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/mapping-mission-instruction.md)
- [SETUP SONY A7R IV](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/mapping-mission-instruction/setup-sony-a7r-iv.md)
- [SETUP SONY A7R V](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/mapping-mission-instruction/setup-sony-a7r-v.md): This page to guide setup the Sony A7R V to work with Pixy SM and M300/M350
- [SETUP SONY ILX-LR1](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/mapping-mission-instruction/setup-sony-ilx-lr1.md)
- [DJI Pilot Settings](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/mapping-mission-instruction/dji-pilot-settings.md)
- [Create Flight Route](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/mapping-mission-instruction/create-flight-route.md)
- [Create Custom Camera](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/mapping-mission-instruction/create-custom-camera.md)
- [Start Mission](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/mapping-mission-instruction/start-mission.md)
- [Post Processing](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/mapping-mission-instruction/post-processing.md)
- [Before Flight Checklist](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/mapping-mission-instruction/before-flight-checklist.md)
- [UPGRADE FIRMWARE](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/upgrade-firmware.md): PIXY SM
- [REFERENCE SETTINGS](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/reference-settings.md): The reference settings for the Pixy SM gimbal and Sony A7R IV cameras
- [Gimbal Settings](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/reference-settings/gimbal-settings.md)
- [Camera Setting](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/reference-settings/camera-setting.md)
- [Camera Settings for Sony A7RV](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/reference-settings/camera-settings-for-sony-a7rv.md)
- [HDMI STREAM](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/hdmi-stream.md): Instruction to stream video over HDMI on the Pixy SM & M300
- [ADAPTER KIT FOR PIXY SM & SONY ILX-LR1](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/adapter-kit-for-pixy-sm-and-sony-ilx-lr1.md)
- [MECHANICAL SETUP](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/adapter-kit-for-pixy-sm-and-sony-ilx-lr1/mechanical-setup.md)
- [CAMERA SETUP](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/adapter-kit-for-pixy-sm-and-sony-ilx-lr1/camera-setup.md)
- [DOWNLOAD](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-sm/adapter-kit-for-pixy-sm-and-sony-ilx-lr1/download.md)
- [PIXY MR](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr.md)
- [FAQ](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/faq.md)
- [GETTING STARTED](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/getting-started.md)
- [Introduction](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/getting-started/introduction.md)
- [Specification](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/getting-started/specification.md): PIXY MR
- [What's in the box?](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/getting-started/whats-in-the-box.md)
- [I/O Connection](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/getting-started/i-o-connection.md): Pixy MR
- [Connect Gimbal to Drone](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/getting-started/connect-gimbal-to-drone.md)
- [Installing & Balancing](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/getting-started/installing-and-balancing.md)
- [Setup Sony ILX-LR1](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/getting-started/setup-sony-ilx-lr1.md)
- [DAMPING ASSEMBLY GUIDE](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/damping-assembly-guide.md): PIXY MR
- [PIXY MR USER INTERFACE](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/pixy-mr-user-interface.md)
- [CAMERA MODE](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/pixy-mr-user-interface/camera-mode.md)
- [GIMBAL MODE](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/pixy-mr-user-interface/gimbal-mode.md)
- [PAYLOADS SETTING](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/payloads-setting.md)
- [CAMERA](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/payloads-setting/camera.md)
- [GIMBAL](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/payloads-setting/gimbal.md)
- [MAPPING MISSION INSTRUCTION](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/mapping-mission-instruction.md)
- [Create Flight Route](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/mapping-mission-instruction/create-flight-route.md)
- [Create Custom Camera Profile](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/mapping-mission-instruction/create-custom-camera-profile.md)
- [Adjust Map Detail](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/mapping-mission-instruction/adjust-map-detail.md)
- [Start Mission](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/mapping-mission-instruction/start-mission.md)
- [Post Processing](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/mapping-mission-instruction/post-processing.md)
- [Before Flight Checklist](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/mapping-mission-instruction/before-flight-checklist.md)
- [TROUBLESHOOTING](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/troubleshooting.md)
- [DOWNLOAD](https://docs.gremsy.com/gimbals-for-m300-m350/pixy-mr/download.md): The Pixy MR uses the same Firmware the Pixy SM
- [PAYLOAD PLUS](https://docs.gremsy.com/gremsy-app/payload-plus.md)
- [KEY FEATURE](https://docs.gremsy.com/gremsy-app/payload-plus/key-feature.md)
- [HOW TO CONNECT?](https://docs.gremsy.com/gremsy-app/payload-plus/how-to-connect.md)
- [GTUNE DESKTOP](https://docs.gremsy.com/gremsy-app/gtune-desktop.md)
- [FAQ](https://docs.gremsy.com/gremsy-app/gtune-desktop/faq.md)
- [KEY FEATURE](https://docs.gremsy.com/gremsy-app/gtune-desktop/key-feature.md)
- [HOW TO CONNECT?](https://docs.gremsy.com/gremsy-app/gtune-desktop/how-to-connect.md)
- [HOW TO USE?](https://docs.gremsy.com/gremsy-app/gtune-desktop/how-to-use.md)
- [GREMSY FLASH TOOLS](https://docs.gremsy.com/gremsy-app/gremsy-flash-tools.md)
- [KEY FEATURE](https://docs.gremsy.com/gremsy-app/gremsy-flash-tools/key-feature.md)
- [HOW TO CONNECT?](https://docs.gremsy.com/gremsy-app/gremsy-flash-tools/how-to-connect.md)
- [HOW TO USE?](https://docs.gremsy.com/gremsy-app/gremsy-flash-tools/how-to-use.md)
- [PAYLOAD ASSISTANT DESKTOP](https://docs.gremsy.com/gremsy-app/payload-assistant-desktop.md)
- [KEY FEATURE](https://docs.gremsy.com/gremsy-app/payload-assistant-desktop/key-feature.md)
- [HOW TO CONNECT?](https://docs.gremsy.com/gremsy-app/payload-assistant-desktop/how-to-connect.md)
- [TROUBLE SHOOTING](https://docs.gremsy.com/gremsy-app/payload-assistant-desktop/trouble-shooting.md)
- [GREMSY THERMAL TOOL](https://docs.gremsy.com/gremsy-app/gremsy-thermal-tool.md)
- [KEY FEATURE](https://docs.gremsy.com/gremsy-app/gremsy-thermal-tool/key-feature.md)
- [HOW TO CONNECT?](https://docs.gremsy.com/gremsy-app/gremsy-thermal-tool/how-to-connect.md)
- [HOW TO USE?](https://docs.gremsy.com/gremsy-app/gremsy-thermal-tool/how-to-use.md)
- [PAYLOAD SETTING APP](https://docs.gremsy.com/gremsy-app/payload-setting-app.md)
- [KEY FEATURE](https://docs.gremsy.com/gremsy-app/payload-setting-app/key-feature.md)
- [HOW TO CONNECT?](https://docs.gremsy.com/gremsy-app/payload-setting-app/how-to-connect.md)
- [HOW TO USE?](https://docs.gremsy.com/gremsy-app/payload-setting-app/how-to-use.md)
- [SYSTEMS TAB](https://docs.gremsy.com/gremsy-app/payload-setting-app/how-to-use/systems-tab.md)
- [MEDIA FILES](https://docs.gremsy.com/gremsy-app/payload-setting-app/how-to-use/media-files.md)
- [IR RADIOMETRIC](https://docs.gremsy.com/gremsy-app/payload-setting-app/how-to-use/ir-radiometric.md)
- [REMOTE CHANNELS](https://docs.gremsy.com/gremsy-app/payload-setting-app/how-to-use/remote-channels.md)
- [CUSTOM MODELS](https://docs.gremsy.com/gremsy-app/payload-setting-app/how-to-use/custom-models.md)
- [OTA UPDATE](https://docs.gremsy.com/gremsy-app/payload-setting-app/how-to-use/ota-update.md)
- [QUICK RELEASE](https://docs.gremsy.com/accessories/quick-release.md)
- [S-PORT](https://docs.gremsy.com/accessories/quick-release/s-port.md): QUICK RELEASE: S-PORT (MIO QUICK RELEASE)
- [M-PORT](https://docs.gremsy.com/accessories/quick-release/m-port.md): M-PORT: Hyper Quick Release 3.0
- [HDMI HYPER QUICK RELEASE V2.0](https://docs.gremsy.com/accessories/quick-release/hdmi-hyper-quick-release-v2.0.md)
- [HDMI HYPER QUICK RELEASE](https://docs.gremsy.com/accessories/quick-release/hdmi-hyper-quick-release.md)
- [PIXY QUICK RELEASE](https://docs.gremsy.com/accessories/quick-release/pixy-quick-release.md)
- [CIRCULAR QUICK RELEASE](https://docs.gremsy.com/accessories/quick-release/circular-quick-release.md): H-series
- [LINEAR QUICK RELEASE](https://docs.gremsy.com/accessories/quick-release/linear-quick-release.md): Pixhawk Payload Female QR & PE hub adhering to the Pixhawk Payload Bus standard
- [DAMPING](https://docs.gremsy.com/accessories/damping.md)
- [Rubber Specification](https://docs.gremsy.com/accessories/damping/rubber-specification.md)
- [Damping Plate Specification](https://docs.gremsy.com/accessories/damping/damping-plate-specification.md)
- [LYNX DAMPING PLATE](https://docs.gremsy.com/accessories/damping/damping-plate-specification/lynx-damping-plate.md)
- [ORUS-L DAMPING PLATE](https://docs.gremsy.com/accessories/damping/damping-plate-specification/orus-l-damping-plate.md)
- [AEVO DAMPING PLATE](https://docs.gremsy.com/accessories/damping/damping-plate-specification/aevo-damping-plate.md)
- [DAMPING PLATE PRO 2.0](https://docs.gremsy.com/accessories/damping/damping-plate-specification/damping-plate-pro-2.0.md)
- [DAMPING PLATE 16 BALL - DP16](https://docs.gremsy.com/accessories/damping/damping-plate-specification/damping-plate-16-ball-dp16.md)
- [PIXY / MIO DAMPING](https://docs.gremsy.com/accessories/damping/damping-plate-specification/pixy-mio-damping.md): SKU: 20S367 - MIO | SKU: 20S218 PIXY
- [ZIO/VIO DAMPING PLATE](https://docs.gremsy.com/accessories/damping/damping-plate-specification/zio-vio-damping-plate.md): The previous version (before 7 May 2025) was wrongly mention the VIO rubber as 40HA.
- [PIXY LR-SP DAMPING PLATE](https://docs.gremsy.com/accessories/damping/damping-plate-specification/pixy-lr-sp-damping-plate.md): The small and lightweight damping system is simply mountable beneath various types of drone platforms with dual carbon rod (12mm) underneath.  The silicone rubber balls used on the damping can remove.
- [PIXY LR TWO AXIS DAMPING PLATE](https://docs.gremsy.com/accessories/damping/damping-plate-specification/pixy-lr-two-axis-damping-plate.md)
- [DAMPING EXTENSION](https://docs.gremsy.com/accessories/damping/damping-plate-specification/damping-extension.md)
- [ADVANCED DAMPING FOR DJI M300/M350](https://docs.gremsy.com/accessories/damping/damping-plate-specification/advanced-damping-for-dji-m300-m350.md): Advanced Damping is designed to support Pixy SM/Pixy MR in use with the M300/M350 for industrial applications, including mapping & inspection.
- [SMART DOVERTAIL ADAPTER](https://docs.gremsy.com/accessories/smart-dovertail-adapter.md): Compatible products: VIO | ZIO
- [VIO](https://docs.gremsy.com/accessories/smart-dovertail-adapter/vio.md): Compatible products: VIO | ZIO
- [What's in the box?](https://docs.gremsy.com/accessories/smart-dovertail-adapter/vio/whats-in-the-box.md)
- [MOUNTING INSTRUCTIONS](https://docs.gremsy.com/accessories/smart-dovertail-adapter/vio/mounting-instructions.md)
- [CHECKING PAYLOADS AND SKYNODE CONNECTION](https://docs.gremsy.com/accessories/smart-dovertail-adapter/vio/checking-payloads-and-skynode-connection.md)
- [PIXY LR](https://docs.gremsy.com/accessories/smart-dovertail-adapter/pixy-lr.md)
- [What's in the box?](https://docs.gremsy.com/accessories/smart-dovertail-adapter/pixy-lr/whats-in-the-box.md)
- [Mounting Instructions](https://docs.gremsy.com/accessories/smart-dovertail-adapter/pixy-lr/mounting-instructions.md)
- [Specification](https://docs.gremsy.com/accessories/smart-dovertail-adapter/pixy-lr/specification.md)
- [gPort](https://docs.gremsy.com/accessories/gport.md)
- [Overview](https://docs.gremsy.com/accessories/gport/overview.md)
- [Features](https://docs.gremsy.com/accessories/gport/features.md)
- [What’s in the box?](https://docs.gremsy.com/accessories/gport/whats-in-the-box.md)
- [Mounting Manual](https://docs.gremsy.com/accessories/gport/mounting-manual.md)
- [gPort For A Specific Camera](https://docs.gremsy.com/accessories/gport/gport-for-a-specific-camera.md)
- [Gimbal](https://docs.gremsy.com/accessories/gport/gimbal.md)
- [Troubleshooting](https://docs.gremsy.com/accessories/gport/troubleshooting.md)

## Software Development Kit

- [GSDK](https://docs.gremsy.com/gremsysdk/gsdk.md)
- [Development Workflow](https://docs.gremsy.com/gremsysdk/gsdk/development-workflow.md)
- [Menu Structure](https://docs.gremsy.com/gremsysdk/gsdk/menu-structure.md)
- [Troubleshooting](https://docs.gremsy.com/gremsysdk/gsdk/troubleshooting.md)
- [PAYLOADSDK](https://docs.gremsy.com/gremsysdk/payloadsdk.md)
- [Development Workflow](https://docs.gremsy.com/gremsysdk/payloadsdk/development-workflow.md)
- [PayloadSdk](https://docs.gremsy.com/gremsysdk/payloadsdk/development-workflow/payloadsdk.md)
- [Payload SDK for Python](https://docs.gremsy.com/gremsysdk/payloadsdk/development-workflow/payload-sdk-for-python.md)

## Help Center

- [Customer Support](https://docs.gremsy.com/help-center/customer-support.md): Need help? We've got your back. If you're stuck, experiencing a bug, or just have a question — here's how to reach us and get help fast.
- [Customer Service](https://docs.gremsy.com/help-center/customer-service.md): The most common questions and answers
- [Gremsy Terms & Conditions](https://docs.gremsy.com/help-center/gremsy-terms-and-conditions.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on a page URL with the `ask` query parameter:
```
GET https://docs.gremsy.com/gremsy-documentation.md?ask=<question>
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.