VIDEO STREAM

This section allows you to configure video streaming parameters for optimal performance based on your network conditions and operational requirements.

Auto Connect

Determines whether the stream starts automatically when the system powers on:

• Enable – Automatically initiates video streaming

• Disable – Requires manual start.

---

Bitrate

Sets the data rate for video transmission. Higher bitrates offer better quality but require more bandwidth:

• 512 Kbps

• 1 Mbps

• 2 Mbps

• 4 Mbps

• 8 Mbps

---

Mount Point

Defines the stream endpoint name used by RTSP clients (e.g., VLC, Payload Assitant App/Desktop):

• Default: payload

• You can change this value as needed for your streaming setup.

---

Port

Specifies the port number used for RTSP streaming:

• Default: 8554

📌 Ensure this port is open and not blocked by firewalls on your network.

---

Resolution

Select the desired output resolution:

• 1920 × 1080 (Full HD)

• 1280 × 720 (HD)

• 960 x 540 (Low Bandwidth Mode)

---

Encoder

Choose the video compression format:

• H.264 (AVC) – Standard and widely supported

• H.265 (HEVC) – Higher efficiency, reduced bandwidth usage

---

Frame Rate

Set the number of video frames per second (FPS):

• Range: 1 to 30 FPS

Lower frame rates reduce bandwidth and power consumption.

---

Saving Your Settings

Click “APPLY” to save and apply your selected streaming configuration. Streaming changes may take effect immediately or require a system reboot.