> For the complete documentation index, see [llms.txt](https://docs.gremsy.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.gremsy.com/gimbals/pixy-lr-s-port-v1/getting-started/introduction.md).

# Introduction

## WARNING

{% hint style="warning" %}

* Please follow the documentation carefully to ensure optimal performance and safe operation of your gimbal.
* The Pixy LR S-Port is a gimbal and must be properly mounted and balanced before powering on. The camera must be securely mounted on the camera cage and the gimbal must be properly balanced before operation. Failure to do so may result in damage to the gimbal.
* This product is only compatible with the Sony LR-1 camera.
* Avoid hard or high-impact landings, as excessive impact may damage the gimbal.
* Do not operate or test the product in the rain.
* When moving to a different testing environment, it is recommended to perform Gyroscope Calibration (Gyro Calibration) before flight to ensure optimal gimbal performance.
* Do not use Control cables other than those specified or supplied by Gremsy. The Control cable included with this product is the VIO Control Cable.
  {% endhint %}

## OVERVIEW

This new gimbal is purpose-built for Sony ILX-LR1 camera, featuring integration with the MAVLink protocol and incorporating the AirPixel Entire R3 module inside for comprehensive camera control, allowing full control via MavCam.

This gimbal has been redesigned with S-Port, which known as Gremsy Mio Quick Release. Standardizing a Quick Release standard across multiple products enables the hot swap functionality of payloads or gimbals, thereby enhancing the optimization of drone systems for diverse photogrammetry missions such as mapping, inspection, surveying,... and efficiency during these missions.

<figure><img src="https://3309772875-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnikHUDUd2JXqkOsnOi7l%2Fuploads%2FelyuxY5Nyhz8JZOeRhmb%2F05%20(1).jpg?alt=media&amp;token=04ed85bd-a5f8-49e5-bf8e-7ce34c8825dc" alt=""><figcaption></figcaption></figure>

<table><thead><tr><th width="259" align="center">No.</th><th>Detail</th></tr></thead><tbody><tr><td align="center">1</td><td>S-port</td></tr><tr><td align="center">2</td><td>Pan Motor</td></tr><tr><td align="center">3</td><td>Pan Balance Adjustment</td></tr><tr><td align="center">4</td><td>Pan Thumb Screw</td></tr><tr><td align="center">5</td><td>Roll Motor</td></tr><tr><td align="center">6</td><td>Roll Balance Adjustment</td></tr><tr><td align="center">7</td><td>Roll Thumb Screw</td></tr><tr><td align="center">8</td><td>Gimbal Status Led</td></tr><tr><td align="center">9</td><td>Tilt Motor</td></tr><tr><td align="center">10</td><td>Tilt Front-Back Balance Adjustment</td></tr><tr><td align="center">11</td><td>Tilt Up-Down Balance Adjustment</td></tr><tr><td align="center">12</td><td>Tilt Up-Down Thumb Screw</td></tr><tr><td align="center">13</td><td>Tripod Screw</td></tr><tr><td align="center">14</td><td>Tilt Front-Back Thumb Screw</td></tr><tr><td align="center">15</td><td>Camera Power Cable</td></tr><tr><td align="center">16</td><td>Camera Connection Hub</td></tr></tbody></table>

## FEATURES

Airpixel Entire R3 Built-In.

<figure><img src="https://3309772875-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnikHUDUd2JXqkOsnOi7l%2Fuploads%2F1LXFWgX1XPfxl9PueztZ%2FF.1.png?alt=media&amp;token=4a9cc00d-b05d-4457-8011-35d7a98c7328" alt=""><figcaption></figcaption></figure>

S-PORT: Hot swap gimbal/payload feature

<figure><img src="https://3309772875-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnikHUDUd2JXqkOsnOi7l%2Fuploads%2FhrLTtB0QHvMFwhOmXzFJ%2FF.2.png?alt=media&amp;token=23b303ca-0f57-4cbd-aa0c-2976f2ab1e42" alt=""><figcaption></figcaption></figure>

Inherits optimized design elements from Pixy LR.

<figure><img src="https://3309772875-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FnikHUDUd2JXqkOsnOi7l%2Fuploads%2Fh3F8WnhcxAnhIGAjOC2C%2FF.3.png?alt=media&amp;token=3cec343f-1129-44fc-827c-0312483caa5f" alt=""><figcaption></figcaption></figure>

Video stream via HDMI.

Setting the camera via Mavcam.

Control the gimbal via Ardupilot/Px4.&#x20;

Geotagging via Entire R3.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.gremsy.com/gimbals/pixy-lr-s-port-v1/getting-started/introduction.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
